Original source · versioned page text
18-0165B Stormwater Management Report_Issue D
Attached to the e-mail Amended stormwater management report - 5, 12 & 18 Taylor Court, Cooroy (MCU18/0120 & RAL18/0013 OPW18/0197) Existing landuse parameter or MUSIC.
Original PDF page 14, section 1. The text section number identifies this passage in the reader.
12 ON SITE SOLID WASTE MANAGEMENT
Person Responsible Contractor’s Site Manager
Operational Policy To prevent the creation of unacceptable visual amenity due to the
storage of onsite solid wastes.
Performance criteria The target level of complaints by nearby residents is no more
than one in every seven day period. Regular monitoring of
volumes of waste generated/stored.
Implementation An onsite storage bin is to be provided to the receiving of
construction wastes.
Strategy
These wastes are to be stored in a manner that prevents leaching
of unwanted materials into the stormwater system downstream
from the site. If a material that is disposed off into the bin that has
potential for hazardous leaching it is not to be disposed of via the
site waste bin. It is to be removed immediately to the council
waste depot or in accordance with EPA standards and guidelines.
When a complaint is received the complaint is to be assessed
and the offending waste bin removed/emptied.
Monitoring Solid waste bin inspections will be carried out to verify that waste
levels in the bins and type of waste are acceptable.
Monitoring will be conducted upon receipt of complaints by
residents.
If the bins are full they are to be taken away by the waste bin
contractor.
Auditing Management to review the complaints register weekly and
corrective action taken.
Reporting The contractor is to notify NSC of a possible nuisance on receipt
of 3 or more solid waste storage complaints in any 24hr period.
Reports are to be provided to NSC upon request
Identification of Any waste related complaints by residents will indicate a failure of
waste control measures.
incident or failure
Corrective Action Apply the following-
1. If the bin is full – have it emptied/replaced
2. Waste that has not been placed in the bin must be
relocated to inside the bin.
HR DESIGN Reference No: 18-0165D Page 13 of 15
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalLog in to download the original file
The download may take up to a minute.