24-0523 Structural Issue A(1)(2)

                                                                                                                                                                                                                                                                                                         Provide 50x80x3.0 Fabricated Unequal Angle
                                                                                                                                                                                                                                                                                                         (Alloy & Temper - 6060/T5 or 6106/T6)
                                                                                                                                                                                                                                                                                      DJ1                with 2/No.14 x 20mm SS tek screw each way




                                                                                                                                                                                                                                                                                                          BR1




                                                                                                                                                                                                                                                                                            80
                                                                                                            BR1




                                                                                                                                                                                                                                                                                                 Neoprene washers between
                                                                                                                                                                                                                                                                                                 all SS fixings and aluminum.
                                                                                                                                                                    Provide 1/No.14 x 20mm SS tek screw each
                                                                                                                                                                    connection with Neoprene washers between
                                              400                                                                                                                   all SS fixings and aluminum.
                                                                                                                                              1                     6mm end plates CFW all round and to BR1
                                              Typ                                                                                        ST


                                                                        ST
                                                                         1

                                                                                                                                     10mm end plates
                                                                                                                                     6mm CFW
                                                    1                                                                                Typical.


                                                          1

                                                                 1/M16 - SS316




                                                                                                   C1
                                                                 threaded rod through                                    Refer to S02
                                                                                                                         for reinforcement details
                                                                 C1




                                                                                                                                                                   BR1
                                                                                                                                                                             125x50x6.0mm UA
                                                                                                                                                                             4mm CFW to BR1
                                                                                                                                                                             2/M12 SS Grade 316
                                                                                                                                                                             chemset anchors.
                                                                                                                                                                             200mm min embedment.
                                                                                                                       High strength shrinkage                               Epoxy = REO 502
                                                                                                                       compensated grout pad


                                                                                                         C1 below
                                                                                                                                                                                                                                                                                                                            SJ1




                                                                                                                                                                                                                                                                   BR1
                                                                                                                                                                                                                                                                         Provide 50x80x3.0 Fabricated Unequal Angle
                                                                                                                                                                                                                                   Neoprene washers between              (Alloy & Temper - 6060/T5 or 6106/T6)




                                                                                                                                                                                                                                                                                                                                              80
                                                                                                                                                                                                                                                                                                                                                      BR1
                                                                                                                                                                                                                                   all SS fixings and aluminum.          with 2/No.14 x 20mm SS tek screw each way

                                                                                                  BR1

                                                                                                                                                                                                                                                             SJ1         SJ1
                                                                                                                                                            C1




                                                                                                                                                         315mm Ø




           Issue   Made By   Date       Description                                     PROPOSED NEW JETTY                                                                                                                                                                        Scale : 1:100                                                             NOTES:
           A       LL        21/10/24   Issue for construction
                                                                                        at LOT 498 (#20) TOPSAILS PLACE, NOOSAVILLE
REVISION




                                                                                                                                                                                                                                                                                  Job No.: 24-0523                                                          1. Do not scale drawings.
                                                                                                                                                                                                                                                                                                                                                            2. Scale is correct at A3.
                                                                                        CLIENT: PONTOON WORKS
                                                                                                                                                                                                                                                                                  Dwg No.: S03                                                              3. Check and verify all dimensions
                                                                                        Designed By : L.LITTLE                                              Drawn By : LL        Date : 21/10/24                                                                                                                                                              prior to commencement of work.
                                                                                        Certified By : B.R. CROMAR BEng (Civil) MIEAust CPEng RPEQ NER                           Date : 21/10/24      Ph: (07) 5444 5578   Email: [email protected]                  CONNECTION DETAILS