Original source · versioned page text
Delegated Report - Code - Planning MCU26 0003 (As Published)
Heritage
5. The existing heritage building known as St Luke's Anglican Church shall be retained on the
site and must not be demolished, removed or substantially altered except in accordance with
the approved plans.
6. Existing heritage features including the original building form, roof form and pitch, external
timber cladding, windows, doors, verandahs, decorative elements and stained glass windows
(where existing) shall be retained and protected unless otherwise approved by Council.
7. Any repair, replacement or extension works must utilise materials, colours, finishes and
detailing that are consistent with and complementary to the heritage character of the building.
The church is to retain the same colour scheme as shown on the attached Local heritage
place card.
8. Future external alterations to the heritage building, including new openings, awnings, decks,
balustrades, cladding, roofing materials or external services, must maintain the heritage
significance of the place and be generally consistent with the approved development.
9. Prior to commencement of building works, all onsite workers are to be advised by the site
foreman/supervisor that the former church is a heritage building and that no damage is to be
caused by construction activities, storage of materials, excavation works and vehicle
movements.
10. Prior to commencement of building works, an archival photographic record of the existing
heritage building shall be prepared and submitted to Council. The record shall include all
elevations, principal internal spaces and significant architectural features.
ENGINEERING
Site Access and Driveways
11. A sealed access driveway must be provided from Gradys Street to all parking and
manoeuvring areas of the development. The works must be undertaken in accordance with
Stanford Consulting’s Driveway Crossover and Details Plan (2327 C02, Rev. A) and must
include in particular:
a. a driveway crossover in accordance with Council’s standard drawing RS-056 and any
associated addendum.
12. Prior to the construction of the driveway crossover, the applicant must submit to Council:
a. all necessary approvals from external service providers and external parties on which
the development works are proposed;
b. certificates demonstrating currency of public liability insurance and works insurance
covering the works;
c. a condition report including photographs of the frontage of the site; and
d. a Construction Management Plan which much address the following:
i. Traffic management during all phases of construction;
ii. Adequate parking arrangements for works and deliveries;
iii. appropriate traffic signage in accordance with the Manual of Uniform Traffic
Control Devices (MUTCD); and
iv. provision for safe vehicle and pedestrian access across the frontage of the site
both during daily construction and after daily construction has ceased.
13. Certification by a Registered Professional Engineer of Queensland that states that the
driveway crossover is constructed in accordance with Stanford Consulting’s Driveway
Crossover and Details Plan (2327 C02, Rev. A) must be submitted to Council. This
certification must be submitted to Council within three (3) months of the commencement of
the use.
Page 12 of 15
Document Set ID: 24983798
Version: 8, Version Date: 03/08/2026
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalLog in to download the original (Delegated Report - Code - Planning MCU26 0003 (As Published).pdf)
Searchable page text hides email addresses. Original files are unchanged and may show email addresses.