Skip to the record
Every meeting, every word.

Original source · versioned page text

2020-07-16-sm-agenda-item-1-attachment-5-final-noosa-plan-2020-part-8-10-schedules-appendix

of 389

Page text read automatically using OCR, there may be inaccuracies

Plans and drawings: the text below has words only, no drawings.

Very large file (19.9 MB): may take a few minutes to open.

Log in to see the plans as drawn
              development infrastructure is appropriately designed and constructed and meets the look and feel styling of Noosa; and
        (c)   Provide acceptable outcomes for development within the road reserve.

 (2)    All civil works within the road reserve and associated with the development requires a Council Operational Works permit.
 (3)    Deviations from or modifications to the design standards outlined in this policy may be acceptable, however it is the responsibility
        of the applicant to demonstrate that the proposal meets the performance outcomes of the applicable code.
 (4)    The key to maintaining the unique character of Noosa is adapting to future needs in a way that recognises the values that have
        made Noosa unique. The publication ‘Noosa Design Principles – How Noosa has been Shaped’ aims to inform and inspire
        designers to innovate and test ideas against simple principles.


 SC6.7.2              Application of the Policy

 (1)    The design standards referred to in this policy apply to development that requires but is not limited to the following:
        (a)   Earthworks – cut and fill – filling of land
        (b)   New roads or widening of existing roads including associated earthworks
        (c)   Stormwater Drainage – underground or open drainage
        (d)   Upgrades to existing roads, stormwater and associated infrastructure that are reasonable and relevant to the expected
              impact of the proposed development
        (e)   Street lighting and the installation of utility services
        (f)   Footpaths and infrastructure for pedestrian and cyclists
        (g)   Access to accommodate the largest service vehicle to the site
        (h)   Parking – on street and off street
        (i)   Signage and line marking
        (j)   Landscaping and/or streetscape works and associated infrastructure
        (k)   Bus stop infrastructure

 (2)    The design standards identified in the ‘desired level of service’ for each road classification may need modification or
        augmentation to suit the design requirements of streetscape centres and will also need to include freight, public transport and
        bicycle networks.
 (3)    All civil works must be planned, designed and constructed in accordance with the current edition of the standards and technical
        documents outlined in ‘Document Precedence’. When conflict occurs between the standards outlined in the documents, the
        hierarchy in ‘Document Precedence’ applies. The document listed first prevails over the others in descending order.
        (a)   Document Precedence:
              (i)     Council Policies, Planning Scheme, Guidelines and Standard Drawings
              (ii)    Austroads ­ Guide to Road Design – examples of often used parts
                      (A)   Part 3 ­ Geometric Design
                      (B)   Part 4 – Intersections and Crossings General
                      (C)   Part 4A – Un­signalised and Signalised Intersections
                      (D)   Part 4B – Roundabouts
                      (E)   Part 6A – Paths for Walking and Cycling
                      (F)   Design Vehicles and Turning Path Templates

              (iii)   Institute of Public Works Engineering Australasia – Queensland
                      (A)   Standard Drawings (Addendums refer for Noosa)
                      (B)   QUEENSLAND URBAN DRAINAGE MANUAL

              (iv)    (iv) Australian Standards as appropriate – examples of often used
                      (A)   AS/NZS 1158 Lighting for Roads and Public Spaces
                      (B)   AS/NZS 2890.1 to 6 ­ Parking facilities
                      (C)   Department of Transport and Main Roads
                      (D)   Manual of Uniform Traffic Control Devices (QDTMR)
                      (E)   Specifications – Category 3 – Roadworks, Drainage, Culverts and Geotechnical



NOOSA PLAN 2020                                                                                                                   Page 47 of 99
Log in to download the original file

2020-07-16-sm-agenda-item-1-attachment-5-final-noosa-plan-2020-part-8-10-schedules-appendix.pdf · 19.9 MB (very large file)

The download may take a few minutes. On mobile data, it is best to wait for Wi-Fi.

The supporting record

Open full page ↗

Source document

Analyse documents ↗Open full page ↗

My Comparisons

Choose two to four records of the same kind. Drag using a handle or use the “Compare” buttons.

Your selected records are saved in this browser for your account. Results use the filters on the page where you choose “Compare selected”.