Original source · versioned page text
2020-07-16-sm-agenda-item-1-attachment-5-final-noosa-plan-2020-part-8-10-schedules-appendix
Plans and drawings: the text below has words only, no drawings.
Very large file (19.9 MB): may take a few minutes to open.
(xiv) relevant management practices, including flood warning and evacuation measures;
(xv) details of any easements or reserves required for stormwater design; and
(xvi) details of detention/retention storages.
(5) The level of detail required for a particular development application should be determined in consultation with Council’s
development assessment officers.
SC6.9.6 Landslide
(1) Where a development is subject to the Landslide hazard overly code, a well made application will include a geotechnical, and
management plan including the impacts of mitigation techniques on flora and fauna.
(2) A site specific geotechnical analysis prepared by a registered professional engineer:
(a) identifying any potential stability and associated problems including—
(i) longterm stability of the site; and
(ii) any potential adverse effects by landslides originating on sloping land above the site;
(iii) longterm stability of the proposed development; and
(iv) access to the site in the event of a landslip; and
(b) detailing proposed methods of addressing any identified potential stability and associated problems.
SC6.10 PSP9 Waste Management
SC6.10.1 Purpose
(1) The purpose of this planning scheme policy is to provide guidance to applicants on:
(a) the application of the Waste Management Code in the Noosa Plan;
(b) the preparation and assessment of waste management plans;
(c) design criteria for waste management including minimum service levels for types of development, size and appearance of
waste storage areas, and vehicular access standards associated with development;
(d) the provision of efficient, safe, hygienic and sustainable waste management practices that meet the needs of occupants,
contractors and minimises environmental nuisance to neighbours; and
(e) the proper consideration of waste minimisation and waste separation to so that materials can be recycled and reused in
developments.
SC6.10.2 Preparing a waste management plan
(1) A waste management plan is a document that details the type and quantity of waste material that is likely to be generated from a
particular development site. The document also details where and how the waste should be stored, how waste will be disposed
and procedures for handling the waste.
(2) A waste management plan is required where the development has the potential to generate significant quantities of waste or
waste that is of a hazardous nature and should have a waste management plan as part of the information required to assess the
application.
(3) The following is a list of developments which must have a waste management plan submitted with any development application
for a Material Change of Use (MCU):
(a) any Residential use with more than 15 dwellings or accommodation units;
(b) any Business use with a total use area greater than 500m²;
(c) all environmentally relevant activities (as defined by Schedule 2 of the Environment Protection Regulation 2008);
(d) construction or demolition of a building other than construction of a Dwelling house, or Class 10 building; and
(e) any other developments as specified by Council’s Waste Management Officer (identified as part of a preliminary application
or as an information request).
(4) Subject to the scale of the development and the discretion of the Manager Environmental Health, a waste management plan may
be submitted as a condition of approval for a MCU, and be approved prior to the issue of a development permit – operational
works.
NOOSA PLAN 2020 Page 88 of 99
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalLog in to download the original file
The download may take a few minutes. On mobile data, it is best to wait for Wi-Fi.