Original source · versioned page text
Attachment 1 - Stormwater Management Plan
Plans and drawings
This document appears to be plans or drawings. Its page text below holds only the words printed on the drawings, without the drawings themselves, so it may be jumbled or hard to follow. To see the plans as drawn, choose Original above or download the file (both need you to log in).
Log in to see the plans as drawn Ocean Protect | OceanGuard Installation Guide
Filtration Cage Install (if required)
1. Lower the filtration cage through the flow diverter until the lip of the cage sits on the internal lip
2. Drill a 5mm hole through the flow diverter, filtration cage lip and into the strut for each T-strut, and
secure the flow diverter to the T-strut with a pop rivet.
Filtration Bag Install
1. Open the split ring by pulling apart at the connection point and thread the filtration bag onto the
stainless steel split ring.
2. Lower the bag into the pit ensuring and pull the internal filter mesh downwards to ensure a secure
fit with the top section.
Page 5 of 5
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalLog in to download the original file
Large file: the download may take up to a minute.
Searchable page text hides email addresses. Original files are unchanged and may show email addresses.