24-01-2020 - Appeal No. 245 of 2019 - Final Order of Judge Rackemann · 51987.2951.01

      10.2. pile arrangement number, arrangement and spacing and associated A frame structure
            and capping beams are to be, as a minimum, in accordance with Drawing Number
            P1001 entitled ‘A Frame for Slope Stabilisation General Arrangement’ and in
            accordance with Figure B4 entitled ‘Case 4; Piles Support’;
      10.3. grout columns are to be installed between the micro-piles to a minimum depth of 10m
            to prevent all sand flow between the piles; and
      10.4. a minimum of 56 piles are required with 50 required under the eastern side of the pool.
11.   All works associated with the construction of the pool are to be certified by a Registered
      Professional Engineer of Queensland (RPEQ) to ensure compliance with the geotechnical
      report prepared by Core Consultants Pty Ltd and dated 24 September 2019, and the
      conditions of approval.
      Coastal Protection
12.   To protect the coastal dune system, a mix of native endemic coastal vegetation consisting of
      ground covers, shrubs and trees must be planted for a width of 5m for the full length of the
      seaward boundary in accordance with Council’s Planning Scheme Policy PSP3 Landscaping
      Plants and Guidelines. The planted vegetation must have a minimum pot size of 200mm
      and must be planted at the following density:
      a.   trees must have a maximum spacing of 5m;
      b.   shrubs must have a maximum spacing of 2m; and
      c.   ground covers planted between the trees and shrub stems to provide a dense
           coverage.
13.   An access gate or like device allowing access to the beachfront area is not permitted to be
      installed.




                                                                                                      3