Approved Plan - Landscape Specification prepared by URBIS - OPW24/0110

Position the Ridge Cap over the Ridge Beam. The end of the Ridge Cap should line up with the outer face of the Wall Channel
(Figure 7.7).
Fasten the Ridge Cap to the Ridge Beam using three 10x16 Hex-Head Screws with Neo Washers (Figure 7.7).

                                                                        10x16 Hex-Head Screw
                                                                        with Neo Washer
                                              Ridge Cap



                                             Ridge Beam
     Ridge Cap

   Ridge Beam




FIGURE 7.7