Approved Plan - Landscape Specification prepared by URBIS - OPW24/0110

 Plant Installation: Ex-Ground + 1000L – On Structure
 Planting hole - Excavate a hole no deeper than the rootball. The hole is to be 3 times the diameter of the
 rootball. Rip the sides of the hole prior to planting.
 Watering dish - Form a 100mm high, 1600mm diameter mounded soil watering dish around the tree. Infill the
 watering dish with mulch. Fill the dish with water regularly during the initial plant establishment period.
 Root Anchor and Foam Block – Platipus tree anchoring systems and Foam Block as above




 Plant Installation: 400L – On Structure
 Planting hole - Excavate a hole no deeper than the rootball. The hole is to be 3 times the diameter of the
 rootball. Rip the sides of the hole prior to planting.
 Watering dish - Form a 100mm high, 1400mm diameter mounded soil watering dish around the tree. Infill the
 watering dish with mulch. Fill the dish with water regularly during the initial plant establishment period.
 Root Anchor and Foam Block – Platipus tree anchoring systems and Foam Block as above




 Plant Installation: 200L – On Structure
 Planting hole - Excavate a hole no deeper than the rootball. The hole is to be 3 times the diameter of the
 rootball. Rip the sides of the hole prior to planting.
 Watering dish - Form a 100mm high, 1400mm diameter mounded soil watering dish around the tree. Infill the
 watering dish with mulch. Fill the dish with water regularly during the initial plant establishment period.
 Root Anchor and Foam Block – Platipus tree anchoring systems and Foam Block as above




 Plant Installation: 100L – On Structure
 Planting hole - Excavate a hole no deeper than the rootball. Place course sand layer under tree or palm
 rootball to ensure the top of rootball is level with finished top of soil level.
 Watering dish - Form a 100mm high, 1000 mm diameter mounded soil watering dish around the tree. Infill the
 water dish with mulch.
 Root Anchor and Foam Block – Platipus tree anchoring systems and Foam Block as above




 Plant Installation: 75L – On Structure
 Planting hole - Excavate a hole no deeper than the rootball. Place course sand layer under tree or palm
 rootball to ensure the top of rootball is level with finished top of soil level.
 Watering dish - Form a 50mm high, 1000mm diameter mounded soil watering dish around the tree. Infill the
 watering dish with mulch. Fill the dish with water regularly during the initial plant establishment period.
 Root Anchor and Foam Block – Platipus tree anchoring systems and Foam Block as above




 Plant Installation: 45L – On Structure




URBIS
URB-P0003847-000-SP.DOCX                                                                               PAGE   46