Approved Plan - Landscape Specification prepared by URBIS - OPW24/0110

                           •   Spray for pests and disease infestations when the pest and fungal attack has been
                               identified
                           •   Apply fertilize once root growth & water uptake has begun
                           •   Wrap trunk/branch to prevent sun scald if necessary due to leaf loss >40%
                           •   Prune dieback
                           •   Top up soil and mulch
                           •   For thin or smooth bark trees, if more than 40% of the foliage is shed due to post-
                               transplant stress then the trunk and branches (greater than 50mm diameter) are to
                               be wrapped with light coloured biodegradable paper or hessian to reduce bark
                               scalding. Wrap from the bottom of the trunk upwards so the layers overlap and thus
                               shed water.
                           •   Organise soil testing
                           •   Adjust and/or replace stakes and ties monthly. Remove staking and visible guying
                               after 11 months.
                           •   Weed regularly (weekly)

   Swale / Bio Pods        •   Test, rectify and adjust the watering regimes or water manually regularly as
                               necessary to maintain optimum soil moisture levels in all areas
                           •   The uses of synthetic, granular blended fertilisers on the site are not permitted.
                               Slow release organic tree tablets shall be used at establishment.
                           •   Spray for pests and disease infestations when the pest and fungal attack has been
                               identified
                           •   Replace failed plans immediately
                           •   Weed regularly (weekly)
                           •   Top up gravel mulch as required
                           •   Sweep and/or remove from bio-pod area any fallen branches and leaf (including
                               any autumn leaf drop), grass clippings and other garden debris.
                           •   Maintenance of the bio-pods includes the detention area, 1:3 batters, kick edges,
                               bio-pod grate covers, and gutter in front of the bio-pod.
                           •   Subsoil drains are to be cleaned out and accumulated sediment manually removed
                               from the surface area of the bio retention device at Off Maintenance and as
                               required during the maintenance period.




URBIS
URB-P0003847-000-SP.DOCX                                                                                   PAGE   57