Approved Plan - Landscape Specification prepared by URBIS - OPW24/0110

         HANDI-MATE ™ HM6 HINGED DOOR SHED INSTALLATION GUIDE


JOINING WALL ASSEMBLIES
The wall assemblies can now be joined together. Fit the Corner Wall Sheet of the Front Wall over the Side Wall Sheet. Ensure
the Corner Sheet fits inside the Side Wall Channels (Figure 5.0).
1. Fit a Corner Bracket over the top Wall Channels. Ensure the pilot holes of the Corner Bracket and Wall Channels line up.
2. Fasten through the Corner Bracket pilot holes and into the top Wall Channels using four 10x16 Hex-Head Screws.
3. Fit a Corner Bracket to the bottom Wall Channels. Fasten through the Corner Bracket pilot holes and into the bottom Wall
Channels using four 10x16 Hex-Head Screws (Figure 5.0).




                                                                                  Front Wall Assembly

                              Wall Assembly




  1.                                          2.                                    3.

                      Wall Channel                  Wall Channel
                                                          Corner Bracket



                                                                                                          Corner Bracket
                                                    10x16 Hex-Head Screw



             Corner Bracket                                                                        10x16 Hex-Head Screw


FIGURE 5.0