Approved Plan - Landscape Specification prepared by URBIS - OPW24/0110

With the Door open, fit the Door Shroud in-between the Door Jambs. Use the Door Shroud as a guide to set the correct
spacing between the Door Jambs (Figure 4.3).
1. Fasten two 10x16 Hex-Head Screws through both Wall Channels and into the Door Jamb. Close the Door and ensure an
approximate 10mm gap between the edge of the Door and end Door Jamb (Figure 4.3).




                                                                                         10x16 Hex-Head Screw




                                                                           Door Shroud



                                                             Door Jamb                           Door Jamb




                                     Wall Channel Assembly

 1.




                                                   10mm




                                     Bottom View

FIGURE 4.3