Approved Plan - Landscape Specification prepared by URBIS - OPW24/0110

                                                     Roof Sheet




                      10x16 Hex-Head Screw
                      with Neo Washer

                                                                                                                  Ridge Beam


                        Wall Channel


Ridge Beam


      1.                                                   2.




     FIGURE 7.4


    Position the Ridge Cap over the Ridge Beam. The end of the Ridge Cap should line up with the outer face of the Wall Channel
    (Figure 7.5).
    Fasten the Ridge Cap to the Ridge Beam using two 10x16 Hex-Head Screws with Neo Washers (Figure 7.5).

                                                                                                         10x16 Hex-Head Screw
                                                                                                         with Neo Washer
                                                                  Ridge Cap
                                              Ridge Beam




    FIGURE 7.5