HRP18103.L02.002_Change application · MCU16/0133.01

Noosa Council documents




                                                                                                        MCU16/0133


                              b.       Licence category will be “Multiple Food Preparation Area” if same
                                       applicant/licensee for the manufacturing and café application, OR separate
                                       applications for “Manufacturer LOW” and “Eating Establishment” will be
                                       required where there are different applicants/licensees for the food business
                                       categories.
                              c.       Plan drawings and an application(s) for a Food Business Licence is to be
                                       made to council’s Environmental Health Section for approval prior to any
                                       building approval, fitting out or use of the premises.
                              d.       A statement indicating the purpose of the food premises, type of food sold,
                                       proposed menu and maximum number of patrons at any time, is to
                                       accompany the application for plan approval.
                              e.       Construction and use of the food premises should comply with the “Food
                                       Premises Design Construction and Fit-Out Guide” and the Food Safety
                                       Standards.
                              f.       Plans and approval is required for any mechanical exhaust ventilation
                                       system, which must comply with Australian Standard AS1668.2-2002 “The
                                       use of ventilation and air-conditioning in buildings”. Certificates should be
                                       provided certifying the system (Form 15 & 16) complies with the Standard
                                       and be lodged with council prior to commencement of trade.
                              g.       Certification by a suitably qualified person* that the plan design and/or
                                       installation and operation of the mechanical exhaust ventilation system,
                                       complies with AS1668 and the requirements of this Decision Notice should
                                       be submitted to council. Completed Building Act 1975 Certificate Forms 15
                                       and Form 16 must also be provided prior to commencement of food
                                       preparation.
                              h.       Horizontal hot air discharge from the mechanical exhaust ventilation system
                                       in the direction of neighboring properties and/or the street precincts is not
                                       desirable and may constitute an environmental nuisance under the
                                       Environmental Protection Act 1994.
                              i.       Toilets for customers and staff to be provided in accordance with the Building
                                       Code of Australia. Design advice is to be obtained from a building certifier
                                       on numbers and standards, including disabled access.
                              Rainwater/Detention Tanks
                      19.     Any rainwater tanks/detention tanks must be constructed with mosquito proof
                              screens (made from either brass, copper, aluminium or stainless steel), and
                              constructed with a mesh size of no more than 1mm, and must be installed in a way
                              that does not accelerate corrosion. Tanks that contain flap valves must be installed
                              so that when closed, mosquitoes cannot pass through the valve.
                      20.     Where it is intended to use rainwater for drinking purposes, a suitable treatment
                              system is required to be installed to disinfect or treat the water to microbiological
                              and physical standards as described in the current Australian Drinking Water
                              Guidelines to make it fit for drinking purposes.
                      7       PROPERTY NOTES

                      Not Applicable




                                                                                                            Page 17 of 21


Document Set ID: 20278602
Version: 1, Version Date: 22/02/2017                                                                 Print Date: 22 February 2017, 1:04 PM