2014-12-09 Planning & Organisation Committee Agenda

PLANNING & ORGANISATION COMMITTEE MEETING AGENDA                             9 DECEMBER 2014


    ENVIRONMENTAL HEALTH
    Refuse Management
    23.   The developer must provide waste storage and disposal facilities in accordance with
          Planning Scheme Policy No. 9 “Waste Management Multi-Dwellings and Commercial
          and Industrial Premises”, including an external imperviously paved area correctly
          sized for all refuse and recycling containers and suitably screened from public places
          and neighbouring properties. A bin wash area is required with a cold-water tap, hose
          and drain outlet connected to the effluent disposal system, via a bucket trap. The
          drain outlet is to be designed to prevent storm water entry to the effluent system and
          this can be achieved with a nib wall 50mm high and up to 700mm x 700mm wide
          (max 0.5m²), or alternatively the waste area can be roofed, or any other design
          approved by Council’s delegate.
    24.   The development must allow refuse-loading areas to be located off street. All
          vehicles associated with the collection of waste/recyclables, shall enter and leave the
          site in a forward direction.
    25.   A Waste Management Plan (Operational) in accordance with Planning Scheme
          Policy No. 9 “Waste Management Multi-Dwellings and Commercial and Industrial
          Premises”, shall be developed and implemented on site. The Waste Management
          Plan must include the following as a minimum: -
             The types and estimated volumes of waste that will be generated from the
               activities approved within the development.
             Methods to be used for dealing with garden waste.
             Initiatives to minimise waste either by waste prevention, reduction, re-use or
               recycling.
             Description of procedures and clearly identified site responsibilities for all site
               occupants for getting all waste to the bins; the storage of bins and the collection
               of bins by the contractor.
             A description of the design details of waste storage and recycling areas
               including size, location, elevation and floor plan, methods of bin washing and
               system to prevent storm water getting into the effluent system via the bin wash.
             A description of types and volume of waste storage containers to be used, and
               the collection frequency of containers,
             The waste and recycling storage area shall include the provision of containers
               for all waste and recycling materials including putrescible matter, non-recycling
               waste, paper/ cardboard, glass, aluminum/steel cans, waste oil, Styrofoam
               boxes, etc.
    Effluent Disposal
    26.   All factory wastewater and wash down waters shall be collected, treated and
          disposed of lawfully on site in an approved effluent disposal system.
    PLUMBING
    Plumbing, Drainage and Waste Water Treatment and Disposal
    27.   The development must be provided with Plumbing, Drainage and an On-site Waste
          Water Treatment and Effluent Disposal System having a capacity sufficient for the
          use*.
           *(Refer to Advisory Note)



                                                                                 Page 97 of 134