Council archive · source document
SUPERSEDED 2009/1058 - Change to Existing Approval [As Published] · 132009.1058.02
2009/1058
Expected waste materials Estimated On-site *specify Off-site *specify *Specify
volume (m³) proposed reuse or contractor & contractor &
onsite recycling recycling outlet landfill site
methods
Excavation material
Green waste
Bricks
Concrete
Timber – please specify
Plasterboard
Metals – please specify
Asbestos
Other – please specify
NOTE: Details of site area to be used for onsite separation, treatment and storage
(including weather protection) shall be provided on the plan drawings accompanying your
application.
The purpose of the Waste Management Plan is to facilitate the segregation of waste for
the effective reuse and recycling of such materials. Additionally, Council rewards those
who segregate waste by significantly reducing disposal fees at the landfill with some items
free. Higher gate fees are charged for loads of mixed waste.
Vehicle Access
30. A vehicular access driveway to serve the house shall be constructed from the Piper Street
frontage of the site with a maximum width of 4.5m pursuant to the Detached House Driveways
Code.
31. To ensure pedestrian safety between vehicles exiting the site and pedestrians on the footpath,
the driveway and any associated fencing or vegetation near the driveway shall comply with the
minimum sight line requirements as defined in AS 2890.1, section 3.2.4. The applicant shall
demonstrate compliance by illustrating these sight lines on the plans submitted for Building
Works approval.
32. A Road/Footpath Permit shall be completed and submitted for the construction of the access
driveway in accordance with Council’s Local Law No.8. If approval is given the driveway shall
be constructed in accordance with Council’s standard drawings, which will be provided at time
of approval.
Roof Water & Stormwater Drainage
33. Roof runoff from any new building shall be directed to a rainwater storage system or tank with
a minimum capacity of 3000 litres that is installed to ensure water from the rainwater storage
system or tank is used for external purposes (such as watering gardens, irrigation, ornamental
ponds, water features, topping-up swimming pools, outdoor cleaning, etc) and for internal
(ground floor) use in washing machine cold taps and toilet cisterns.
34. All rainwater tanks are to be designed and installed in accordance with the Queensland
Development Code (QDC) current at the time of building approval, and shall be part of the
plumbing application for approval. The location and capacity of the tanks shall be clearly
shown on the plans submitted for Building Works approval and any overflow shall be directed
to the Piper Street road frontage.
Page 5 of 10
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalUsed in these records
SUPERSEDED 2009/1058 - Change to Existing Approval [As Published]Related documentApplication case desk ↗
About this file
- File size
- 66 KB (small file)
- File type
No other editions are linked here.