Council archive · source document
Delegated Report - Code - Planning MCU22 0197 [As Published] · MCU22/0197
A.200 C Elevations, prepared by Zest Design 31/01/2023
Amendments The front balustrade is to include a mix of building materials or design
to further articulate the front façade of the building.
*(Refer to Advisory Note)
Building Height
4. The maximum height of the development must not exceed 8 metres above the ground level
and the exposed portion of the external façade of the building, except for the apex of the roof
of unit 1 which must not exceed 8.17 metres.
5. Certification must be submitted to Council from a Registered Cadastral Surveyor (Qld) which
certifies that the building does not exceed the maximum height requirement of this Decision
Notice.
Performance Bond
6. Security in the form of a cash bond or trading bank guarantee to the sum of $20,000 must
be submitted to Council, to secure performance of all conditions of this approval, prior to pre-
start meeting. The cash bond or trading bank guarantee will be returned on performance of
the conditions of approval less any costs incurred by Council in respect of enforcing
performance of this permit. Council reserves the right to call upon the bond or guaranteed
sum to effect compliance with conditions.
Street Identification
7. The street address of the development must be clearly visible and discernible from the
primary frontage of the site by the provision of a street number and, where appropriate, the
building name.
Water & Sewer Connections
8. An underground connection to reticulated water and sewerage must be provided to the
premises in accordance with the standards and requirements of Northern SEQ Distributor–
Retailer Authority (Unitywater).
9. A Certificate of Completion from the Northern SEQ Distributor–Retailer Authority (Unitywater)
must be submitted to Council that certifies an underground connection to reticulated water
and sewerage has been provided to the premises.
Building Appearance
10. All deck and balcony areas above ground level must not be enclosed with shutters, louvres,
glass panelling or the like.
11. External colours and finishes must be of an understated colour scheme and low-reflective
roofing and cladding materials.
12. All air conditioning units or other mechanical equipment must be located at ground level, or
otherwise fully enclosed or screened such that they are not visible from the street frontages
nor adjoining properties.
13. Waste storage areas, clothes drying areas and external storage areas must be screened
from view of the street.
Clothes Drying Areas
14. Each dwelling unit must be provided with access to an outdoor clothesline which is screened
from public view.
Fencing and Walls
15. Fencing must:
a. Be located wholly within lot boundaries.
Page 13 of 25
Document Set ID: 22435587
Version: 8, Version Date: 15/06/2023
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalUsed in these records
Delegated Report - Code - Planning MCU22 0197 [As Published].pdfRelated documentApplication case desk ↗
About this file
- File size
- 3.6 MB (large file)
- File type
No other editions are linked here.
Original file
Log in to download the original file
The download may take up to a minute.