2019-12-10 Planning & Environment Committee Agenda

PLANNING & ENVIRONMENT COMMITTEE MEETING AGENDA                            10 DECEMBER 2019


          c.   The uncovered forecourt area is to be graded and drained to an independently
               certified stormwater treatment system listed on Council’s Register for Certified
               Hydrocarbon Separators. The system shall be installed in accordance with the
               approved site-based stormwater quality management plan.
          Submit certification
    79.   Prior to the commencement of the use certification by a suitably qualified person that
          the uncovered forecourt area has been installed and constructed in accordance with
          the above requirements must be submitted to Council.
          Road tanker delivery stands
    80.   Prior to the commencement of the use the road tanker delivery stand shall be located
          fully within the fuel dispensing area or the road tanker delivery stand located within
          the uncovered forecourt area shall be constructed and installed in accordance with
          the following:
          a.   the area shall be large enough so a tanker can fit wholly within the delivery
               stand area.
          b.   the area shall be clearly demarcated.
          c.   the area shall be drained to a collection sump that normally drains to the
               uncovered forecourt area’s stormwater treatment system.
          d.   a diversion valve shall be installed that diverts drainage to the containment and
               treatment system for the fuel dispensing area during filling operations.
          Submit certification
    81.   Prior to the commencement of the use certification by a suitably qualified person that
          the road tanker delivery stand has been designed, constructed and installed in
          accordance with the above requirements must be submitted to Council.
          Stage 1 vapour recovery
    82.   Prior to the commencement of the use construct and install stage 1 vapour recovery
          for underground systems storing motor spirit/petrol that has:
          a.   vapour return lines that return all vapour displaced from the storage tank to the
               delivery tanker.
          b.   a design that prevents the mixing of product in piping common to more than
               one tank.
          c.   vapour-tight couplings on the vapour line that close automatically when
               disconnected.
          d.   incompatible liquid and vapour couplings.
          e.   a pressure vacuum valve and a 10-millimetre orifice in parallel fitted to the
               storage tank vent pipe, or accepted equivalent.
          f.   the vapour recovery point located within 2 metres of the respective fill point.
          Submit certification
    83.   Prior to the commencement of the use certification by a suitably qualified person that
          stage 1 vapour recovery equipment has been constructed and installed in
          accordance with the above requirements must be submitted to Council.
          Stage 2 vapour recovery systems
    84.   Prior to the commencement of the use Stage 2 vapour recovery (VR2) equipment
          shall be designed and installed in accordance with the following:


                                                                                   Page 33 of 84