2019-12-10 Planning & Environment Committee Agenda

PLANNING & ENVIRONMENT COMMITTEE MEETING AGENDA                               10 DECEMBER 2019


          Rainwater/Detention Tanks
    98.   In accordance with the Public Health Act 2005, rainwater tanks (including the
          detention tank) must be constructed with mosquito proof screens (made from either
          brass, copper, aluminium or stainless steel), and constructed with a mesh size of no
          more than 1mm, and must be installed in a way that does not accelerate corrosion.
          Tanks that contain flap valves must be installed so that when closed, mosquitoes
          cannot pass through the valve.
    99.   Where it is intended to use rainwater for drinking purposes, a suitable treatment
          system is required to be installed to disinfect or treat the water to microbiological and
          physical standards as described in the current Australian Drinking Water Guidelines
          to make it fit for drinking purposes.
    WASTE
          Waste Disposal
    100. The developer must provide waste storage and disposal facilities in accordance with
         Planning Scheme Policy No. 9 “Waste Management Multi-Dwellings and Commercial
         and Industrial Premises”. The facilities must include an external impervious area
         correctly sized for all refuse and recycling containers and suitably screened from
         public places and neighbouring properties. A bin wash area is required with a cold-
         water tap, hose and drain outlet connected to sewer, via a bucket trap. The drain
         outlet must be designed to prevent storm water entry to the sewerage system. This
         can be achieved with a nib wall 50mm high and up to 700mm x 700mm wide (max
         0.5m²), or alternatively the waste area can be roofed, or any other design approved
         by Council.
    101. Refuse containers must be provided in accordance with the requirements of the
         Environmental Protection (Interim Waste) Regulation 1996 and (Waste Management)
         Regulation 2000, for the storage and collection of refuse.
    102. Public bins must be provided throughout the car park to reduce littering. All bins
         provided must be for refuse and recycling and be decanted into the bulk bins by the
         site operators.
          OPERATIONAL WORKS CONDITIONS
    103. Advertising devices undertaken in accordance with this approval must generally
         comply with the approved plans of development. The approved plans are listed in the
         following table unless otherwise amended by these conditions.

           Plan No.        Rev.    Plan/Document Name                                 Date

           DA-1000         15      Site Plan, prepared by Alleanza Architecture       11.07.2019

           DA-7000         4       Signage plan, prepared by Alleanza Architecture    12.07.2019

    104. Advertising devices authorised by this approval must be undertaken generally in
         accordance with the Approved Plans listed within this Decision Notice. The Approved
         Plans must be amended to incorporate the amendments listed within this Decision
         Notice and resubmitted to Council prior to the issue of any Development Permit for
         any civil works onsite.
    105. This approval authorises the following signs as defined by the planning scheme and
         shown on the Approved Plans. In this regard the plans must be amended to reflect
         the following:
          a.    The pylon sign must be setback at least 1.50 metres from the front boundary



                                                                                     Page 36 of 84