Council archive · source document
Attachment 16- Amended Stormwater Management Plan MCU12/0208
Plans and drawings: the text below has words only, no drawings.
Noosa on Weyba
Stormwater Management Plan
Coarse sediment forebays on the inlet point.
Batters should be densely vegetated to deter pedestrian/vehicle access. The batter slope should be at
least 1 in 2.
Inorganic mulch laid over the filter media surface improves moisture retention. The mulch used should
not float during rainfall.
The overflow pit invert will be 150 mm above the base to provide for extended detention. The total
depth of the bio-retention garden will be around 250 mm to prevent ponding within the road.
Litter baskets should be installed on the overflow pits.
Clean out points should be provided for all underdrainage.
A flat pedestrian refuge area of around 300mm width should be provided along the boundary with the
road.
A typical bio-retention garden cross-section is shown below in Image 2 and an example is shown in Image 3.
Image 2 Typical Bio-retention Garden (Water Sensitive Urban Design: Streetscape Planning and
Design Package, Brisbane City Council, 2011)
Image 3 Bio-retention Garden
6.2.4 Bio-retention Swales
Bio-retention swales are similar to bio-retention basins, except that they are long and narrow systems with
no extended detention depth. They have a shallow longitudinal grade of 2 percent or less. Field inlets are
located along the length of the swale to drain excess flows. Litter baskets should be installed on all field
inlets.
Northbrook Corporation Pty Ltd Version 4 16 September 2013
SMP_v4.docx Commercial in Confidence Page 16
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalUsed in these records
Attachment 16- Amended Stormwater Management Plan MCU12/0208Related documentApplication case desk ↗
About this file
- File size
- 10.0 MB (large file)
- File type
No other editions are linked here.
Original file
Log in to download the original file
The download may take up to a minute.