Council archive · source document
BRSS2403-000_Final Report_210807.pdf [As Published] · 132007.1703
25
7.0 RESIDENTIAL USE CODE
7.1.1 The table below is an assessment of the proposed development in accordance with the Specific Outcomes and
Probable Solutions of the Residential Use Code.
7.1.2 Table 14.21. Division 6 – Specific Outcomes and Probable Solutions for all Residential Uses.
7.1.3 Table 14.24 Division 6 – Specific Outcomes and Probable Solutions for Multiple Housing Typee 4 – Conventional
Table 14 – 21 Specific Outcomes and Probable Solutions For All Residential Uses
Column 1 Column 2
Specific Outcomes Probable solutions (if code assessable)
14.52 Effects of use
Electricity supply infrastructure S1.1 No solution provided
O1 The development does not adversely impact on S2.1 Development for uses adjacent to or
existing or future electricity supply infrastructure; within 50m of an existing electricity substation
AND incorporates noise attenuation measures to
O2 All uses and works maintain an adequate safe mitigate noise impacts;
distance from electrical infrastructure including AND
substations, overhead powerlines, power poles and S2.2 Buildings and structures (including
transformers swimming pools, sheds, tennis courts or
outbuildings) are not constructed under
overhead electricity transmission lines, or
within electricity easements;
AND
S2.3 A minimum separation distance is
maintained from the electricity transmission
line to the closest boundary of habitable
buildings and child activity areas, as follows—
a) 20m for transmission lines up to 132kV;
b) 30m for transmission lines between
133kV and 275kV; and
c) 40m for transmission lines greater than
275kV
Complies
O1 – O2 The existing electricity and supply infrastructure will sustain the proposed development and will not adversely impact
on the existing or future infrastructure of the area. We advise this application is merely a Material Change of Use over the
existing detached house with only minor internal building works proposed.
14.53 Environmentally Sustainable Building Design
Hot Water Systems S3.1 All hot water systems installed are—
O3 Hot water systems are installed and operated to a) solar systems; or
support the efficient use of natural resources and b) electric heat pump systems; or
minimise consequent pollution such as greenhouse gas c) natural gas or LPG systems; or
emissions. d) any combination of a), b) or c).
Complies
O3 The existing hot water systems servicing the site will remain and no change is proposed as part of this application.
Water supply and conservation S4.1 If in a designated rainwater tank area as
O4 On-site water storage is designed and operated to identified in Map 1 of Schedule 8, residential
support the efficient use of water; uses that qualify as class 1A or 1B structures
AND under the Building Code of Australia have a
O5 On-site water storage is adequate for occupants every rainwater tank or tanks in accordance with
day use and fire fighting purposes. Schedule 8.
AND
S5.1 Where not in a water service area a
rainwater tank of a minimum of 60,000 litres is
provided for each dwelling unit, with the
exception of Multiple Housing Type 1.
11 Allambi Rise, Noosa Heads • BRSS2403-000 • 21st August 2007
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalUsed in these records
BRSS2403-000_Final Report_210807.pdf [As Published]Related documentApplication case desk ↗
About this file
- File size
- 797 KB (small file)
- File type
No other editions are linked here.