Original source · versioned page text
Attachment 6 - Waste Management Plan
Plans and drawings
This document appears to be plans or drawings. Its page text below holds only the words printed on the drawings, without the drawings themselves, so it may be jumbled or hard to follow. To see the plans as drawn, choose Original above or download the file (both need you to log in).
Log in to see the plans as drawnAttachment 6 – Waste Management Plan
November 2020
WASTE MANAGEMENT PLAN
for Low Impact Industry/Warehouse Units at 11 Leo Alley Rd, Noosaville QLD 4566
The industrial development will facilitate the storage and removal of general waste in association with
primary function of the premises. In accordance with the relevant Planning Scheme requirements and
general commercial waste management the table below sets out the details of this Waste Management
Plan.
Land use Low Impact Industry / warehouse
Anticipated waste Industrial tenancies – general waste, paper and
generation sources cardboard
Customers – general waste
Anticipated General waste – 1 x 1500L bulk bin (1.5m3)
waste generation Recycling – 2 x 1500L bulk bin (1.5m3)
Collection frequency Weekly for general waste
Fortnightly for recycling
Bin storage location Central within the site accessible via the common
driveway on hardstand in screened enclosure
Collection location Kerbside from site frontage
Signage Not required
The anticipated waste management plan for the development is derived from the type and size of bins
and how these will be serviced. Waste management will be provided in accordance with Planning Scheme
Policy 9 and detail the following: -
• Waste storage location – The bins storage area is located centrally within the site on hardstand
pavement within an enclosed screened area with a dimension of 3.8m x 3.8m (approx.). The bin
enclosure is to be centrally located within the site proportionally accessible by all industrial units
and will be screened and aesthetically treated to comply with the necessary screening
requirements.
• Refuse volumes and Servicing – The development will use one (1) 1500L bulk bins for general
waste serviced weekly and one (1) 1500L bulk bins for recyclable waste serviced fortnightly.
Garden waste will be removed by a private landscape/garden contractor. The bins will be wheeled
within the common driveway from the designated storage area to the collection/service point.
The bins will be serviced at the kerbside of Leo Alley Road from a dedicated point of collection.
Page 1 of 2
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalSearchable page text hides email addresses. Original files are unchanged and may show email addresses.
Full text of the other 1 page
Page 2
Attachment 6 – Waste Management Plan
November 2020
• Waste storage area maintenance – The bins will be washed inside the enclosure that will be
drained to an approved sewerage connection point. A water tap and hose will be positioned inside
the enclosure. The maintenance and cleaning of the bin storages area is the responsibility of the
Maintenance Contractor engaged by the Body Corporate. It is the Maintenance Contractors
responsibility to ensure that the bin storage areas are kept clean and tidy, take all practicable
steps to prevent infestation of vermin and / or insects and is kept in a clean and sanitary condition.
The bin storage areas are to be maintained to a standard acceptable to the Body Corporate
committee.
Should you require anything further or wish to discuss any aspect of the above, please do not hesitate to
contact me.
Yours sincerely,
James Brownsworth
DIRECTOR
INNOVATIVE PLANNING SOLUTIONS
Page 2 of 2