approval

Noosa Council documents




               18.    The area of land between the front fence and the boundary must be landscaped to screen
                      the fencing.
                      Landscaping
               19.    The development site must be landscaped. The works must be undertaken in accordance
                      with an Operational Works approval and Noosa Plan 2020 Planning Scheme Policy PSP2
                      Landscaping for the Coastal Communities area and, in particular, include (but not limited to):
                      a.      a 1.5m wide garden for the full length of the western boundary;
                      b.      screening vegetation for the full length of the western boundary; and
                      c.      vegetation within the front 6 metres of the property.
               20.    Existing vegetation in the road reserve must be retained, unless written authorisation from
                      Council is granted for the clearing.
               21.    Trees to be retained must be protected from clearing or construction activities by:
                      a.      clearly marking vegetation to be retained with flagging tape
                      b.      installing protective fencing around the drip line of the vegetation
                      c.      restricting stockpiling, storage and vehicle parking to those areas which are already
                              cleared
                      d.      using low impact construction techniques around vegetation.
               22.    Street trees at a maximum of one every 8 metres must be provided along the Park Crescent
                      frontage, or as determined in conjunction with a Council delegate prior to the issue of an
                      Operational Works approval.
               23.    All landscape works must be established and maintained in accordance with the approved
                      design for the life of the development, and in a manner that ensures healthy, sustained and
                      vigorous plant growth. All plant material must be allowed to grow to full form and be
                      refurbished when its life expectancy is reached.
                      Community Management Statement
               24.    Any proposed Community Management Statement required for the development pursuant to
                      the Body Corporate and Community Management Act 1997 must be submitted to Council for
                      endorsement at the same time as submission of the Building Format Plan (or similar) to
                      Council for compliance assessment.
               25.    All clauses and by-laws of the proposed Community Management Statement must accord
                      with the requirements of this Decision Notice.
                      Environmental health
               26.    The developer must provide waste storage and disposal facilities in accordance with
                      Planning Scheme Policy PSP9 - Waste Management, including an external imperviously
                      paved area correctly sized for all refuse and recycling containers and suitably screened from
                      public places and neighbouring properties.
               27.    A bin wash area is required with a cold-water tap, hose and drain outlet connected to sewer,
                      via a bucket trap. The drain outlet is to be designed to prevent storm water entry to the
                      sewerage system and this can be achieved with a nib wall 50mm high and up to 700mm x
                      700mm wide (max 0.5m²), or alternatively the waste area can be roofed, or any other design
                      approved by Council.
               28.    Noise emission from mechanical equipment shall comply with the following requirements:
                      a.    Air-conditioning and Refrigeration
                             7am to 10pm: Maximum background + 5dB(A);
                             10pm to 7am: Maximum background + 3dB(A);
                      b.    Pumps


                                                                                                           Page 4 of 12
Document Set ID: 21313305
Version: 5, Version Date: 08/12/2020                                                                 Print Date: 8 December 2020, 2:48 PM