AS PUBLISHED Negotiated Report (Representations made) MCU23 0094 · MCU23/0094

                                             streetscape. In this regard, the clothesline is to be relocated to the
                                             northern wall of the terrace with the clothesline screened to 1 metre,
                                             with the remaining portion (~2 metres) of the area an open terrace.
                                             These areas are to be redesigned to not contribute to gross floor area
                                             as per the administrative term of the Noosa Plan 2020.

                          Plan No.           Rev.   Plan/Document Name                             Date

                          WD.10.03           G      Fencing Plan prepared by Blackwood 5.12.2023
                                                    Architecture & Design

                          Amendments         Front fences or walls along Eumundi Noosa Road frontage are set
                                             back an average of 1 metre and are articulated to provide visual
                                             interest by stepping the design at a maximum of 5 metre intervals.

                          Plan No.           Rev.   Plan/Document Name                             Date

                          WD.1.23            I      3D Visualisation prepared by Blackwood 5.12.2023
                                                    Architecture & Design

                          WD.1.25            H      3D Visualisation prepared by Blackwood 5.12.2023
                                                    Architecture & Design

                          Amendments         Introduce an additional colour to the external building façade with a
                                             deep, stronger colour tone to highlight individual dwellings and
                                             adding visual interest to the street and surrounds.

                      *(Refer to Advisory Note)
               Applicant’s Representation
               The applicant seeks to amend condition 3 and delete the requirements for plan amendments.
               The revised designs include the following changes to the plans to address the ‘Plans Requiring
               Amendment’. The following comments address each of the plan amendment requirements.
               3. Development authorised by this approval must be undertaken generally in accordance with the
               Approved Plans listed in the table/s below.
               The plans must be amended to incorporate the amendments listed within the table below and
               resubmitted to Council prior to the issue of any Development Permit for Building Works*
                      -    Remove the communal recreation area facilities in its entirety, including the swimming
                           pool, BBQ facilities and bathroom. Provide a revised landscaping plan that details this
                           area densely planted with screening vegetation.
                      -    A 5-metre-wide buffer densely planted with trees and shrubs including species from 1
                           metre to 8 metres in height is to be detailed.
               Amended plans are included removing the pool and all associated facilities. The area is now 100m2
               grassed area including a 3.5m dense landscape buffer to the adjoining dwelling house to the south,
               with a 2m high fence along the boundary. The relevant Performance Outcome of the Medium
               Density Residential Zone Code seeks for an appropriate setback to common recreational areas to
               ensure the amenity of neighbours in respect of noise, light and odour is maintained. The removal
               of the pool results in less people likely to use this area as a common recreational area.
                      -    The Ground Level “drying court” (as detailed on the ground level of Units 101, 102, 105
                           & 701-704) are not to be an enclosed area, the door is to be removed. Remove external
                           walls/screens of each “drying court” and replace with a free-standing screen with a
                           minimum of 50% transparency, and minimum of 300mm gap from the top and bottom of
                           the screen. The fixed screen is not to exceed a height of 1.8 metres, 2.1 metres from

                                                                                                      Page 5 of 25

Document Set ID: 22926712
Version: 8, Version Date: 13/05/2024