2017-02-07 Planning and Environment Committee Agenda

PLANNING & ENVIRONMENT COMMITTEE MEETING AGENDA                               7 FEBRUARY 2017


          Certification
    39.   Upon completion of the work and prior to the final inspection a certificate must be
          issued by an RPEQ certifying that the works have been constructed in accordance
          with the Operational Works permit and applicable engineering standards.
    40.   A final inspection and approval of the completed works by Council’s Inspector is
          required. Please contact Council on 5329 6291 to arrange for the inspection.
          As Constructed Plans/On Maintenance
    41.   All municipal works must be accepted ‘On Maintenance’ by Council in accordance
          with Council’s relevant Planning Scheme Policy. To achieve ‘On Maintenance’, the
          supervising RPEQ must submit to Council:
          a.    Certification that all works have been undertaken and completed in accordance
                with the requirements of this Permit.
          b.    As Constructed details in accordance with Council’s Planning Scheme Policy.
OPERATIONAL WORKS - SIGNAGE
          Nature and Extent of Approved Development
    1.    This approval authorises the following signs as defined by the planning scheme and
          shown on the Approved Plans:
          a.    1 pylon sign
          b.    3 wall signs
    2.    The approved signs must not be used for the advertisement of goods and/or services
          not sold or conducted on the site (ie. third party advertising).
    3.    The approved signs must not exceed a maximum sign face area of 4m² (per sign)
          and must not exceed a total sign face area of 10m² (a combined total of all signs on
          site). The tank and stand pylon sign must not exceed 5m in height from the natural
          ground level.
    4.    The approved signs must be positioned wholly within the property boundaries of the
          subject site, and must not be located within or across any easements.
          Illumination
    5.    The approved signs must not be illuminated in any way except for 2 wall signs, being
          1 sign located on the north elevation and 1sign located on the western elevation.
    6.    The approved illuminated signs must not incorporate flashing lights nor involve
          illumination by any means other than:
          a.    an internal light source
          b.    a down light, if externally lit.
    7.    Illumination resulting from direct, reflected or other incidental light emanating from the
          approved signs must not exceed a luminance of 300 candelas per square metre.
    8.    All conduits, wiring, switches or other electrical apparatus installed on an advertising
          device must be concealed from general view.
          Movement
    9.    The approved signs must not revolve, move, contain moving parts, change its
          message, flash, have a moving or flashing border, or give the impression of
          movement in any way.




                                                                                   Page 23 of 125