01072015144724 · MCU10/2065

MCU10/2065

Site Stability

32.

A Geotechnical Engineer or similar qualified expert must assess the soil condition on
site, determine the soil classification, establish whether any measures are required to
protect the stability of adjoining buildings and/or structures and/or land, and make

" recommendations on the type of foundation system(s) best suited for the proposed

development. The recommendations of this report must be incorporated into the

‘design and construction of the proposed development.

Erosion and Sediment Control

33.

Any person acting on this permit shall prevent erosion and sediment export from
leaving the site. Site control measures such as silt fencing, controlled gravel access to
the:site and controlled disposal of waste, will be necessary.

‘In this regard plans detailing the methods of. controlling erosion and sediment are

required to be submitted to the Council for approval prior to obtaining a Development
Permit for Operational Works.

General

34.

35.

36.

37.

Digital detailed designs including drawings, calculations, specifications etc, must be
submitted with any application for a Development Permit for Operational Works in
respect of stormwater drainage works. The design must be in accordance with
Council’s Planning Scheme Policy PSP05 — Engineering Design Standards — Roads,
Drainage and Earthworks. To avoid. conflict with underground pipes or services, all
existing and proposed services. required by the development must be shown on the
plans.

’ Any damage caused to any public utility’ during the coursé of construction must be
‘repaired to Council’s standards and at no cost to Council.

Any alteration of any public utility or other facilities necessitated by the development of
the land or associated construction works external to the site must be at no cost to
Council.

The transportation of all materials to and from the site must be undertaken ina manner
such that no particle matter escapes onto a public road. All vehicles carrying materials os

" gither to or from the site must be covered to prevent materials including dust being

windblown from the vehicle.

 

HEALTHY PLACES

Noise Nuisance

38.

Noise emission from mechanical equipment shall comply with the following
requirements:

38.1. Air-conditioning and Refrigeration .
® 7am to 10pm: Maximum background + 5dB(A)
® 10pm to 7am: Maximum background + 3dB(A)

38.2. Pumps

® 7am to 7pm: Maximum background + 5dB(A)
e 7pm to 16pm: Maximum background + 3dB(A)

® 10pm to 7am: No audible noise.

PD-DA-FM384/1-13/04/2010 : : , Page 6 of 13