Negotiated Decision Notice - MCU25 0118 (As Published) · MCU25/0118

               12.    A Certificate of Completion from the Northern SEQ Distributor–Retailer Authority (Unitywater)
                      must be submitted to Council that certifies an underground connection to reticulated water
                      and sewerage has been provided to the premises.
                      Building Appearance
               13.    External design features, materials and finishes must be as shown on the Approved Plans,
                      with no inclusions or alterations made without approval in writing by Council.
               14.    External finishes of the building must be a mix of lightweight and textured external finishes,
                      with masonry areas incorporating a variety of textured finishes to break up the surface.
               15.    All deck and balcony areas must not be enclosed with shutters, louvres, glass panelling or
                      the like thus remaining as open structures.
               16.    External colours and finishes must be of an understated colour scheme and low-reflective
                      roofing and cladding materials.
               17.    All air conditioning units or other mechanical equipment must be fully enclosed or screened
                      such that they are not visible from the street frontages nor adjoining properties.
               18.    Waste storage areas, clothes drying areas and external storage areas must be screened
                      from view of the street.
               19.    Each unit must be provided with access to an outdoor clothesline which is screened from
                      public view (external to the development site) and where achievable, internal to the
                      development.
               20.    A privacy fence must be constructed along the southern and western boundaries and must
                      not exceed 2 metres in building height.
                      Waste Management
               21.    A waste storage area must be provided in accordance with Planning Scheme Policy 9, Waste
                      Management and the Noosa Plan’s Waste Management Code, including an external
                      imperviously paved area correctly sized for all refuse and recycling containers and suitably
                      screened from public places and neighbouring properties.
               22.    A waste storage area must be designed and maintained in accordance with Planning
                      Scheme Policy PSP9 Waste Management and the Noosa Plan’s Waste Management Code.
                      The waste storage area must be:
                      a.      imperviously paved and correctly sized for all refuse and recycling containers;
                      b.      bunded and graded so that wastewater and bin leakage drain to the sewer;
                      c.      provided with a conveniently located hosecock and backflow prevention device,
                              connected to a water supply to service the area; and
                      d.      roofed or otherwise covered.
               23.    A Waste Management Plan must be prepared that details the type and quantity of waste
                      material that is likely to be generated by the development; where and how the waste will be
                      stored, disposed of and procedures for handling the waste. The Waste Management Plan
                      must be submitted and approved by Council prior to the issue of a Development Permit for
                      Operational Works.
                      Community Management Statement
               24.    Any proposed Community Management Statement required for the development pursuant to
                      the Body Corporate and Community Management Act 1997 must be submitted to Council for
                      endorsement at the same time as submission of the Building Format Plan (or similar) to
                      Council for compliance assessment.




                                                                                                       Page 4 of 13
Document Set ID: 24721652
Version: 5, Version Date: 30/04/2026