220711 Noosa Oyster Project - CEMP

     3.3.      Environmental Control Plan
            The key features of the environmental management for this project is to keep good control
            on the following;

     •   waterways and drains
     •   erosion and sediment controls
     •   work areas, machinery or vehicle parking, waste management areas, fuel and chemical
         stores
     •   vegetation requiring protection
     •   traffic management
     •   monitoring locations
     •   environmentally sensitive areas on and adjacent to the site

     3.4. Environmental Schedules
            This EMP refers to a number of environmental schedules comprising forms, registers and
            checklists. They are listed below and included in Attachment 2.

                  1. Site Environmental Induction Register
                  2. Site Environmental Inspection Checklist

                  3. Environmental Complaint Form
                  4. Non-Conformance Report Form
                  5. Hazardous Substances Register
                  6. Safety Data Sheets (SDS) Register
                  7. Waste Register



4.          Monitor and Review
     4.1. Environmental Monitoring
         M&J Marine will monitor the environmental controls listed in Section 3.2 through regular
         site environmental inspections.

         Site environmental inspections will be undertaken halfway through the job and will be
         recorded by the Site Supervisor on the Site Inspection Checklist (see Attachment 2).

     4.2. Environmental Auditing
            Planned and documented audits aimed at evaluating the environmental conformance of the
            project will be carried out by SMADS. Any deficiencies identified during the audits shall
            be documented and actioned in accordance with SMADS corrective action process (see
            Section 4.5).

M&J Marine Services                             Page 18                   Environmental Management Plan