Council archive · source document
Minor Change Existing Approval - 132007.2399.03 (AS PUBLISHED)
General
74. A suitably qualified Registered Professional Engineer Queensland shall prepare engineering
drawings and specifications for all engineering works, which shall be submitted in conjunction
with an application for a Development Permit for Operational Works. In this regard a
DXF/DWG file on GDA94 zone 56 grid of the proposed cadastre layout is to be submitted in
conjunction with any application for Operational Works.
75. Digital detailed designs including drawings, calculations, specifications and a schedule of
works, shall be submitted with any application for a Development Permit for Operational
Works in respect of roadworks and stormwater drainage works. The design shall be in
accordance with Council’s Planning Scheme Policy PSP05 – Engineering Design Standards
– Roads, Drainage and Earthworks. To avoid conflict with underground pipes or services,
all existing and proposed services required by the development shall be shown on the plans.
76. To facilitate production of As Constructed drawings it is suggested that all design drawings
are submitted in the Asset Design and As Constructed (ADAC) digital format. (Guidelines on
the use of ADAC are available at www.adac.com.au).
77. Any damage caused to any public utility during the course of construction shall be repaired
to Council’s standards and at no cost to Council.
78. Any alteration of any public utility or other facilities necessitated by the development of the
land or associated construction works external to the site shall be at no cost to Council.
79. The transportation of all materials to and from the site shall be undertaken in a manner such
that no particle matter escapes onto a public road. All vehicles carrying materials either to
or from the site shall be covered to prevent materials including dust being windblown from
the vehicle.
80. As Constructed drawings and data shall be certified by a qualified experienced Civil Engineer
for design intent, and a Licensed Surveyor shall certify the cadastre and the location, level
and type of all services and structures. All of which shall be submitted to Council for checking
and for Council’s records.
The data must fully detail levels for all engineering works including but not limited to drainage
structures, finished ground levels and pavement surface levels. The data shall be submitted
in the Asset Design and As Constructed (ADAC) digital format. (Guidelines on the use of
ADAC are available at www.adac.com.au).
Approval of works shall not be granted until all As Constructed information has been supplied
and accepted by Council.
81. The proposed names of new roads (public and private) and parks shall be lodged with the
application for a Development Permit for Operational Works.
Names are to be selected from any of the following categories:-
• Easily pronounced words of Murri languages.
• Names or words of local significance or historical interest.
• Flora, fauna, industry, topographical, geological and similar features and terms
relative to the district.
• Surnames of persons of merit or historical significance. (Personal names should be
avoided.)
Approval will not be given to a name that is the same or similar to the name of another road
in the Shire, or of a road in close proximity in a neighbouring Shire. Names that are not easily
pronounced, or may cause confusion to emergency services are to be avoided.
All street signs on new roads (public and private) and parks shall be erected prior to works
being accepted on maintenance. For private roads and parks, Council will provide the
nameplate and signpost to the Applicant upon payment of $250 per sign.
Page 12 of 19
Document Set ID: 24764739
Version: 6, Version Date: 18/05/2026
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalUsed in these records
Minor Change Existing Approval - 132007.2399.03 (AS PUBLISHED).pdfRelated documentApplication case desk ↗
About this file
- File size
- 216 KB (small file)
- File type
No other editions are linked here.