Skip to the record
Noosa’s premier civic archive.

Council archive · source document

Attachment C - Current DA MCU15.0111 · MCU15/0111.03

of 57

Text shows just the words. Original shows the document exactly as it was published.

Check the original when the exact wording matters.

Noosa Council documents




                                                                                                       MCU15/0111


                      15.     On completion of the development, the developer must submit to Council written
                              certification from an Acoustic Engineer confirming the proposed noise barriers
                              meet the noise limits for each adjoining residence as outlined in the approved
                              Acoustic Report.
                      Fencing
                      16.     Fencing shall be erected to all boundaries of the site and shall have a minimum
                              height of 1.5 metres Trading Post Road and Pearsons Road and 1.8 metres on all
                              other boundaries (Note: fences may be required to have a greater height for the
                              purpose of meeting acoustic requirements, as further detailed in these conditions).
                      17.     All fencing to road frontages of the site shall be setback a minimum of 1 metre with
                              an average of 2 metres and be screened with landscaping, or alternatively, be of
                              open construction (ie. minimum 50% transparent) (provided it is not a required
                              acoustic fence).
                      18.     Any new fencing along the northern boundaries of existing Lot 4 RP 215922
                              adjoining Prospect Park (Lot 101 SP 208264) must be flood compatible e.g. three
                              strand plain wire fencing.
                      Building Setbacks
                      19.     All buildings shall be setback a minimum of 6 metres to Elm Street, Pearsons
                              Road, Lamonts Road and Trading Post Road, with the exception of the northern
                              corner of the aged care facility shown at 5.5m from Trading Post Lane.
                      20.     All buildings shall be setback a minimum distance of 2 metres to adjoining
                              properties.
                      Built Form
                      21.     Buildings shall be varied in their architectural style, construction materials, colours
                              and finishes.
                      22.     Transformers, waste storage areas and the like shall be screened to reduce their
                              visual intrusiveness.
                      External Road/Frontage Works on Main Roads
                      23.     Roadworks required on Cooroy Connection Road (Elm Street) at its intersection
                              with Pearsons Road including two Bus Stops with shelters, a pedestrian refuge
                              and upgrade to existing kerb line and linemarking must be undertaken in Stage 1a
                              of development in accordance with a Development Permit for Operational Works.
                              The works shall be generally as shown on drawing titled External Works Functional
                              Layout Plan Pearsons Road Intersection, prepared by Calibre Consulting dated
                              08/01/2016, referenced 15-001261-RF02 Issue B and in compliance with
                              Department of Transport and Main Roads (DTMR) standards, and subject to
                              Council’s and DTMR’s approvals.
                      24.     Roadworks required on Cooroy Connection Road (Elm Street) at its intersection
                              with Lamonts Road must be undertaken in Stage 4 in accordance with a
                              Development Permit for Operational Works of development. The works shall be
                              generally as shown on drawing titled External Works Functional Layout Plan
                              Lamonts Road Intersection, prepared by Calibre Consulting dated 08/01/2016,
                              referenced 15-001261-RF01 Issue B and in compliance with Department of
                              Transport and Main Roads standards, and subject to Council’s and DTMR’s
                              approvals.




                                                                                                            Page 5 of 37


Document Set ID: 20103451
Version: 1, Version Date: 25/07/2016                                                                    Print Date: 25 July 2016, 3:34 PM

Used in these records

About this file

File size
8.1 MB (large file)
File type
PDF

No other editions are linked here.

Original file

Log in to download the original file

Attachment C - Current DA MCU15.0111.pdf · 8.1 MB (large file)

The download may take up to a minute.

The supporting record

Open full page ↗

Source document

Analyse documents ↗Open full page ↗

My Comparisons

Choose two to four records of the same kind. Drag using a handle or use the “Compare” buttons.

Your selected records are saved in this browser for your account. Results use the filters on the page where you choose “Compare selected”.