Gibson - Certification of design of prescribed tidal work

         (c) the prescribed tidal work has been designed to comply with Schedule 3 – Code for
              assessable development that is prescribed tidal works of the Coastal Protection and
              Management Regulation 2017.
     3. This certification does not cover the construction or installation of the works on site. The
        Contractor shall confirm the adequacy of the site conditions during installation and shall advise
        the Engineer if variation from details shown on the drawings occur. No detailed site
        investigation or studies have been carried out by us or provided to us for consideration. The
        design review has been carried out on the basis of limited enquiry only. Pile and land anchor
        depths shown are applicable to founding in stiff clay or dense sand. There is some additional
        risk of failure should the above design criteria be exceeded, or actual site conditions be inferior
        to those assumed. If ground conditions other than those described above are encountered
        during construction or seabed levels encountered are deeper than those shown on the
        drawings, further advice should be sought. Safety in Design Considerations have been taken
        into account as part of this design but are the ultimate responsibility of the contractor and end
        user.




                                                                        TIM PETERS RPEQ 5496

--------------------------------------------------      ----------------------------------------------------------------
                Signed                                         Print name and RPEQ registration number
(person making this declaration)


           18/03/2022
-------------------------------------------------
                Dated