Attachment 2 - Negotiated Decision Notice MCU16-0130

Noosa Council documents




                                                                                                    MCU16/0130

               18.    For the purpose of measuring and certifying relevant noise conditions and reporting (eg.
                      equipment, air conditioning units, motors, electrical generators, compressors, etc), a
                      suitably qualified person is either:
                      a.      a Registered Professional Engineer of Queensland, or
                      b.      an environmental consultant with a minimum of 3 years current experience in the
                              field of acoustics.
                      Lighting
               19.    Light sources at the premises must be positioned and shielded to prevent light spillage
                      outside the boundaries of the premises.
               20.    When requested by Council, a Lighting Report (LR) showing monitoring and recording of
                      lighting levels must be undertaken to investigate any complaint (other than a frivolous or
                      vexatious complaint) caused by light emissions from the premises. Such monitoring
                      must be undertaken within a reasonable and practicable timeframe nominated by
                      Council and be performed by a suitably qualified person in accordance with the relevant
                      Standard. The report is to be submitted to Council detailing the results of such
                      monitoring and recommendations for any measures to achieve compliance with the
                      Standard or as otherwise directed.
               21.    Outdoor lighting associated with the premises must be designed, sited, installed and
                      operated to comply with Table 2.1 & 2.2 of Australian Standard AS4282-1997 “Control of
                      the obtrusive effects of outdoor lighting” using a control level of 1.
                      Landscaping Works
               22.    The development site must be landscaped. The works must be undertaken in
                      accordance with an Operational Works approval, Planning Scheme Policy 3
                      “Landscaping Plants and Guidelines” and properly prepared landscape plan by a
                      qualified person* and must include in particular:
                      a.      The landscaping areas shown on the approved Floor Plan (Plan No. SK02-02,
                              dated 02/02/2017);
                      b.      A minimum 3 metre wide densely planted landscaping strip to the full length of the
                              sites frontage to Eumundi Noosa Road (excluding location for driveway and
                              crossovers). Landscaping must provide visual buffering of the development from
                              the road through the planting of vegetation that is in scale with the building;
                      c.      A minimum 2 metre wide densely planted landscaping strip to the full length of the
                              eastern and southern boundary. Landscaping must provide visual buffering of the
                              development from any adjoining residential properties through selection of
                              appropriate species achieving adequate heights; and
                      d.      One x 100 litre street tree with a mature height of 4m located within the road
                              reserve south of the existing crossover.
               23.    All landscape works must be established and maintained in accordance with the
                      approved design for the life of the development, and in a manner that ensures healthy,
                      sustained and vigorous plant growth. All plant material must be allowed to grow to full
                      form and be refurbished when its life expectancy is reached.




                                                                                                 Page 4 of 11



Document Set ID: 20586157
Version: 6, Version Date: 24/05/2018                                                              Print Date: 24 May 2018, 11:22 AM