Original source · versioned page text
Reference Documents - MCU24 0141 & OPW24 0184 [As Published]
Very large file (16.7 MB): the original may take a few minutes to open or download. The page text below is quick to read.
Original PDF page 4, section 1. The text section number identifies this passage in the reader.
1. Introduction
This Stormwater Management Report has been commissioned by Aboda Design Group, to support a combined
Material Change of Use (MCU) and Operational Works application with Noosa Shire Council (NSC) for a
proposed Low/Medium Impact Industry Warehouse development at 4 Leo Alley Road, Noosaville. The subject
site is described as Lot 259 on MCH4540 and has an area of 0.3039ha. The proposed site location is identified
in Figure 1.
The purpose of this report is to demonstrate that the proposed development generally complies with the
stormwater quality and quantity management requirements of the NSC planning policies (PSP), Queensland
State Planning Policy (SPP 2017), Queensland Urban Drainage Manual 2017 (QUDM), Noosa Plan 2020 Water
Quality and Drainage Code and other relevant codes and guidelines.
The minor storm event is the 10% Annual Exceedance Probability (AEP), and the major storm event is the 1%
AEP event in accordance with NSC PSP05.4.1E, industrial development category.
Figure 1 - Site Location (Nearmap)
1.1. Reference Information
The documents in the table below have been attached as supporting information to this report, they can be
found in the appendices.
Document Name Source Comment Appendix
Engineering Drawings Infinity CE Stormwater Engineering Drawings A
Detail and Contour Survey Minstaff Survey Existing Site Survey B
Development Plan Aboda Architectural Plans C
240127 – Stormwater Management Plan 3 of 10
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalLog in to download the original file
The download may take a few minutes. On mobile data, it is best to wait for Wi-Fi.