Council archive · source document
Delegated Report - Code - MCU22 0139 CHANGED FROM COUNCIL REPORT [As Published] · MCU22/0139
Very large file (12.8 MB): the original may take a few minutes to open or download. The page text below is quick to read.
Performance Outcome Assessment Compliance
Buildings and structures:
do not exceed two The proposal will be of three (3) storeys noting that X
storeys. the Noosa Plan 2020 defines a Storey as:
“…a space within a building between 2 floor levels, or
a floor level and a ceiling or roof, other than—
(i) a space containing only a lift shaft,
stairway or meter room; or
(ii) a space containing only a bathroom,
shower room, laundry, toilet or other
sanitary compartment; or
(iii) a space containing only a combination of
the things stated in subparagraphs (i) or
(ii); or
(iv) a basement with a ceiling that is not more
than 1m above ground level…”
And a basement is defined as:
“…a space—
(a) between a floor level in a building and the
floor level that is immediately below it; and
(b) no part of which is more than 1m above
ground level.”
The application material confirms that portions of the
proposed basement will exceed 1m above ground
level and although marginal, the basement is
theoretically a non-compliant basement and
constitutes a storey.
This means that the proposal will be of three (3) storey
design and while the lift shafts and stairs at the rooftop
level are excluded from being a storey, the proposal
will appear as a four (4) storey building when viewed
from adjoining properties, specifically properties to the
north of the site.
The proposal achieves only one of the six (6) Performance Outcomes sought and the proposed
height variation is not supported. A condition will be included that the proposed building must not
exceed 59 AHD and a for a survey certified by a RPEQ prior to any works.
Building Scale and Bulk and Roof Form (Rooftop Terrace)
Building Scale and Bulk
Performance Outcome PO9 of the Medium Density Residential Zone Code requires development
to be of a compatible scale with surrounding development and the circumstances of the site; and
does not present an appearance of bulk to adjacent properties, roads, or other areas in the vicinity
of the site.
The proposal has been designed with the minimum setback required and presently exceeds the
maximum plot ratio, have non complaint setbacks, and exceeds the building height requirements.
Document Set ID: 22625793
Version: 14, Version Date: 03/04/2024
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalUsed in these records
Delegated Report - Code - MCU22 0139 CHANGED FROM COUNCIL REPORT [As Published].pdfRelated documentApplication case desk ↗
About this file
- File size
- 12.8 MB (very large file)
- File type
No other editions are linked here.
Original file
Log in to download the original file
The download may take a few minutes. On mobile data, it is best to wait for Wi-Fi.