Original source · versioned page text
EngSWMP
Attached to the e-mail Response to Information Request MCU16/0079 (email 2 of 3).
Cage Installation
1. Lower the cage through the Top Section until the lip of the cage sits on the internal lip of the Top
Section.
2. Drill a 5mm hole through the Top Section and Cage Lip, and secure with a pop rivet.
3. Repeat for opposite side.
©2013 Stormwater360 | EnviroPod Installation Manual 8
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalLog in to download the original (EngSWMP.PDF)
Searchable page text hides email addresses. Original files are unchanged and may show email addresses.