Original source · versioned page text
Appendix D - Letter and Concept Engineering Services Plan
Plans and drawings
This document appears to be plans or drawings. Its page text below holds only the words printed on the drawings, without the drawings themselves, so it may be jumbled or hard to follow. To see the plans as drawn, choose Original above or download the file (both need you to log in).
Log in to see the plans as drawn2 LAWFUL POINT OF DISCHARGE The subject site grades in a west to east direction towards Goodwin Street, with approximately 2.0m of fall across both allotments. We note that the existing dwelling will be demolished and minor earthworks will occur to accommodate two new flat building pads with minimal retaining walls. The site will continue to convey external flows as per pre-developed conditions. Roof water will be discharged via new kerb adapters to Goodwin Street, flowing to existing council stormwater infrastructure downstream within Goodwin Street. We consider the above provides a lawful point of discharge for the development and will enable non- worsening of peak discharges from the development to adjacent properties. Refer Contour’s Concept design (2756-C01) for concept earthworks, retaining wall locations and roofwater kerb adapters, attached within Appendix A. 3 SUMMARY Based on our investigative works, we consider that Council has no impediment to the approval of this development within the context of the driveway, crossover and/or stormwater. We therefore recommend that Council approves the application subject to reasonable, relevant, equitable and justifiable conditions. Yours Faithfully, Matt Folker – Civil Engineer For and on behalf of: CONTOUR CONSULTING ENGINEERS PTY LTD http://www.contource.com.au/ CIV2756-SW01 – 108 Goodwin Street, Tewantin 2 MF/SC
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalSearchable page text hides email addresses. Original files are unchanged and may show email addresses.