Minor_Change_Req

Figure 6 Earthworks comparative analysis (Clare Design 2022)


In summary, the proposed redesign of the Detached House does not create any additional impacts or worsen
any existing impacts, and achieves an approved design from a compliance, functionality, visual amenity and
slope stability point of view. It is requested that the Revised Building Design Plans in Attachment 2 be supported
by Council as a Minor Change to the approved development accordingly.


Proposed Changes to Conditions
The proposed changes to the approved plans trigger the need to change Conditions 2 and 6 of the Development
Permit (Council ref MCU19/0008).

Condition 2
Naturally, Condition 2 which lists the Approved Plans associated with the Development Permit, is required to be
updated to refer to the Revised Building Design Plans prepared by Clare Design in Attachment 2 (Dwg DA00 –
DA18, dated 31/01/22).

Condition 3
Condition 3 of the Development Permit reads as follows:

      Building Height and Storeys
      3. The maximum height of the development must not exceed 8 metres above the finished ground
      level and the natural ground surface.

As detailed above, the proposed development exceeds 8 metres in height from finished ground level in some
areas. As such, it is requested to amend the above condition as follows:

      Building Height and Storeys
      3. The maximum height of the development must not exceed 8 metres above the finished ground
      level and the natural ground surface.

Condition 6
Condition 6 of the Development Permit reads as follows:

      Built form
      6. No structures or buildings are to be located within the 15 metre setback to the eastern boundary.



Our ref: 220202                                                                                         Page 6 of 8