Att 4 - SWMP · MCU21/0117

                    4. 1. C O N S T R U C T I O N P H A S E

                        4.1.1 Erosion and Sediment Control Measures

            During construction it is necessary to manage the stormwater run-off to avoid pollution of
            downstream waterways from sediments and gross pollutants from the site. Best practice
            erosion and sediment controls shall be installed to minimise the discharge of typically
            sediment heavy run-off from the site in accordance with the objectives of Appendix 2 of the
            SPP (July 2017) shown below in Figure 4.1.




               Figure 4.1 SPP 2017 Construction Phase Stormwater Management Design Objectives

            Refer to Appendix A Proposed Development Plans which contains the site-specific ESC Plan
            prepared for the development. The measures proposed for the site include:

                    1. Sediment fencing is to be installed along the northern and eastern boundaries of the
                       site to capture sediment from leaving the site. Drainage paths are to be inspected to
                       ensure the sediment fences are not being bypassed as a result.

                    2. A shakedown area to be installed at the construction entry/exit to the site to minimise
                       sediment being transported to and from the site.


                                                                                                              Page 10 of 26
P +61 7 5211 1003              A 37 Mary St, Noosaville Qld 4566   E [email protected]       recorconsulting.com