Council archive · source document
Planning Report with Appendices · OPW17/0531
Attached to the e-mail Operational Works Application OPW17-05310.msg.
SPECIFIC OUTCOMES PROBABLE SOLUTIONS COMMENT
14.80 Illumination, lighting and movement
O8 An advertising device only incorporates S8.1 Illuminated signs are not located in a Residential Complies – it is not anticipated that the proposed
illumination and lighting where it:- Zone, Rural Zone or Open Space Conservation Zone. advertising devices will be illuminated. However, it is
a) is appropriate to its setting and is compatible with S8.2 Where the advertising device is illuminated, it:- requested that the potential for illumination of these
the visual amenity of the surrounding area; a) has a maximum luminance of 350 candelas per m²; signs at night by ground level lighting fixtures with a
b) does not cause an environmental nuisance or b) does not incorporate flashing lights; focus in an upwards direction highlighting the signface
distraction; c) is switched off between 11:00pm and sunset of the be afforded should circumstances arise that warrant
c) does not create glare, reflecting or flaring of colours; following day; and this outcome. It is advised that should the signs be
and d) is limited to 1 sign per tenancy. illuminated they will be designed and constructed in
d) will not create a potential safety hazard, including a accordance with the probable solutions as nominated
traffic safety hazard. in S8.2 of the Advertising Devices Code.
O9 An advertising device does not move or incorporate S9.1 No solution provided. Complies – the proposed advertising devices will not
elements that give the impression of movement. revolve, contain moving parts or have a moving
border. It is noted that the section of ‘gate’ within the
fence sign will be a moving component, but this is only
to afford movement of construction vehicles into and
out of the site in relation to the construction of the
approved multiple dwelling over the subject land.
Specific requirements for all types of advertising devices
Wall or Façade Sign Types – Not Applicable
Awning sign types – Not Applicable
Freestanding Sign Types
All freestanding signs (a) do not exceed a maximum height of 5m and a Alternate Solution – only one (1) freestanding
signface area of 4m²; billboard sign is intended to be located on the subject
(b) ensure that not more than one (1) freestanding land. This billboard is existing and has been located
sign is erected on any site (including a site with on the subject site for approximately 20 years.
multiple occupancy buildings.
Pylon sign (a) is mounted as a freestanding structure in a The height of the billboard sign is in the order of 4.5 to
landscape environment; 4.8m, with a signface area of 25.92m2.
(b) is situated at least half its height from any site Notwithstanding, it is considered that the sign is
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalUsed in these records
Planning Report with Appendices.pdfRelated documentApplication case desk ↗
About this file
- File size
- 2.9 MB (large file)
- File type
No other editions are linked here.
Original file
Log in to download the original file
The download may take up to a minute.