Council archive · source document
Planning Report with Appendices · OPW17/0531
Attached to the e-mail Operational Works Application OPW17-05310.msg.
SPECIFIC OUTCOMES PROBABLE SOLUTIONS COMMENT
boundary; appropriate in this instance, given the following:-
(c) is designed and treated in such a way that the the sign will not obscure any significant views to
supporting framework and the back of the signface or from the site;
area blend with the surrounding streetscape or field a the billboard does not project beyond the front
view; and property boundary of the site;
(d) has a maximum thickness not exceeding 75mm per the billboard is sited such that it is located within a
metre of height above ground level; landscaped setback, and will not interfere with
construction and vehicle movements associated
Note—a streetscape or landscape analysis prepared by with the development of the site in accordance
a competent person may be required in support of a with an approved multiple dwelling;
development application for a pylon identification sign Due to the slope of the land and the position of
or billboard identification sign. the sign no significant views or features will be
blocked by the sign. The sign will be treated to
compliment the surrounding area, to the extent
practicable;
The sign is located immediately within the front
property boundary, as any further setback would
result in the sign not being visible and therefore
able to appropriately ‘advertise’ the intended
development of the subject land;
The sign is existing, and is important in terms of
providing identification of the site (i.e. ‘Parkridge
Noosa’) from Resort Drive which is important for
recognition purposes of residents, visitors and
construction vehicles.
The sign is designed such that it is a single face
sign with a maximum thickness not exceeding
75mm per metre of height above ground level.
Fence Sign Types
Fence Sign (a) does not exceed a signface area of 1m² per linear Alternate Solution – while the proposed
metre of fence length to which the sign is attached to embellishment (or advertising material) intended to
a maximum signface area of 4m² whichever is the be installed on the existing plywood fence will not
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalUsed in these records
Planning Report with Appendices.pdfRelated documentApplication case desk ↗
About this file
- File size
- 2.9 MB (large file)
- File type
No other editions are linked here.
Original file
Log in to download the original file
The download may take up to a minute.