Original source · versioned page text
Enclosure 4 - Schedule 4a
Attached to the e-mail Operational Works Application OPW17/0016.
Design, construction and safety - pontoons
18.1 Prescribed tidal work that is a pontoon, The design and construction of the pontoon is consistent with Not applicable
for a private purpose, and not used only for the following standards—
rowing, is designed and constructed in a way (a) subject to paragraph (c), a pontoon for individual use is able
to ensure it is able to support its intended to support at least a live load of 1.5kPa; (b) subject to paragraph
loads, having regard to its relevant loading (c), a pontoon for group use is able to support at least a live load
matters. of 2.0kPa; (c) if a relevant planning scheme standard is more
stringent than the standard mentioned in paragraph (a) or (b)—
the relevant planning scheme standard, to the extent it is
more stringent than the standard mentioned in paragraph (a) or
(b).
18.2 Prescribed tidal work that is a pontoon, The design and construction of the pontoon is consistent with Not applicable
for a non-private purpose, and not used only the following standards—
for rowing, is designed and constructed in a (a) subject to paragraph (c), a pontoon open for use by the
way to ensure it is able to support its intended general public or used for a commercial purpose is able to
loads, having regard to its relevant loading support at least the following— (i) a distributed live load of
matters. 3.0kPa; (ii) a concentrated live load of 4.5kN;
(b) subject to paragraph (c), a pontoon other than a pontoon
mentioned in
paragraph (a) is able to support at least the following—
(i) a distributed live load of 2.0kPa; (ii) a concentrated live load of
4.5kN;
(c) if a relevant planning scheme standard is more stringent than
the standard mentioned in paragraph (a) or (b)—the relevant
planning scheme standard, to the extent it is more stringent than
the standard mentioned in paragraph (a) or (b).
18.3 Prescribed tidal work that is a pontoon The design and construction of the pontoon is consistent with Not applicable
and used only for rowing is designed and the following standards—
constructed in a way to ensure— (a) subject to paragraph (c), the access walkway of a pontoon
(a) it is able to support its intended loads, used only for rowing is able to support at least a live load of
having regard to its relevant loading matters; 3.0kPa;
and (b) the flotation unit of a pontoon used only for rowing is able to
(b) it is safe for persons using the support at least a live load of 1.5kPa;
pontoon to launch and retrieve (c) if a relevant planning scheme standard is more stringent than
rowing vessels. the standard mentioned in paragraph (a) or (b)—the relevant
planning scheme standard, to the extent it is more stringent than
the standard mentioned in paragraph (a) or (b).
18.4 Prescribed tidal work that is a pontoon is The design and construction of the pontoon is consistent with Not applicable
designed and constructed in a way to ensure the following standards—
any load applied to the pontoon by a person or (a) subject to paragraph (f), a pontoon’s access walkway
thing on the pontoon does not cause the extends at least 500mm onto the pontoon’s flotation unit;
pontoon to tip over or tilt to a degree causing (b) subject to paragraph (f), a pontoon’s access walkway is
the person or thing to fall off the pontoon. constructed with a material that has a non-slippery surface;
20
Coastal Protection and Management Regulation 2003 – Schedule 4A – IDAS code for the development of prescribed tidal work
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalSearchable page text hides email addresses. Original files are unchanged and may show email addresses.