ECM_23038802_v2_Decision Notice - Approved by Delegation of Authority MCU24 0044 & OPW24 0045 · MCU24/0044

               5.     The maximum number of vessels that may be berthed, moored, attached or stored on the
                      structure(s) must not exceed 2.
               6.     The use of the pontoon must not cause any adverse effects on the amenity of the surrounding
                      areas including changes to light, views, air quality and noise.
               7.     Vessels berthed/moored at the pontoon must be located a minimum of 1.0 metre from
                      the prolongation of the property boundaries.
               8.     Vessels must be connected directly to the pontoon, and not located side by side or in tandem
                      with another vessel.
               9.     All structures must be designed and constructed such that they are free standing within the
                      waterway and are not connected to or behind the revetment wall
               10.    All structures must have no detrimental effects on stormwater drains and/or easements.
               11.    A rigid handrail must be fitted on at least one side of the gangway. The handrail must be of
                      an open design and in accordance with the approved plans.
               12.    No boatlifting devices are to be attached or moored at the pontoon structure for the purpose
                      of elevating a vessel above the water without Council approval.
               13.    There must be no electrical reticulation system carrying electricity in excess of 24 volts
                      beyond the revetment wall unless all switches and power outlets are positioned above the
                      1%AEP flood level.
               14.    Lighting associated with the use must be designed, installed, operated, and maintained in
                      accordance with Section 3 of AS4282 Control of the Obtrusive Effects of Outdoor Lighting.
               15.    The pontoon is to be used for private purposes only with no commercial operations to be
                      undertaken.
               16.    Boat repair activities are not permitted on site.
               17.    Wastewater and sullage must only be disposed of at approved pumpout facilities.
               18.    The mooring facility must not be utilised for live-aboard purposes.
               19.    Any construction and post construction activity is not to impact on the condition of the
                      waterway, and is to be conducted so as not to breach the Environmental Protection Act EPA
                      (1994) and the Environmental Protection (Water) Policy 2009.
               20.    Certification by a Registered Professional Engineer of Queensland that states that the
                      pontoon and gangway are constructed in accordance with best practice methods and are
                      structurally sound must be submitted to Council. This certification must be submitted to
                      Council within three (3) months of the completion of the works. A final inspection and
                      approval of the structure by Council’s Inspector is also required. Please contact Council’s
                      Development Assessment Branch on 5329 6500 to arrange the inspection.
               21.    This approval lapses where the construction of the pontoon has not commenced within two
                      (2) years of the date of issue of the approval, unless application is made and approved by
                      Council for an extension.
               22.    After completion, the proposed works must be maintained in a sound state of repair in
                      accordance with the approved plans




                                                                                                    Page 3 of 15
Document Set ID: 23038802
Version: 2, Version Date: 30/05/2024