Council archive · source document
Attachment C - 6.3.2 Medium Density Residential Zone Code · MCU20/0071
Performance Outcomes Acceptable Outcomes Compliance
Building Setback AO11.1 The proposed development
Buildings and structures meet the following accommodates boundary setbacks as
PO11 follows:
minimum boundary setbacks:
Buildings and structures are designed and • 6.01m to the Moorindil Street front
sited to: (a) for frontages — 6 metres
boundary;
(a) provide a high level of amenity to (b) for side boundaries— • 6.115m to the Toolar Street front
users of the subject site and (i) 1.5 metres setback up to 4.5 boundary;
adjoining premises, including metres height; • 2.495m to the western side
provision of visual and acoustic 2 metres setback boundary; and
(ii)
privacy; between 4.5 metres and • 2m to the southern side boundary.
(b) not unreasonably obstruct views 7.5 metres height; and
or cause overlooking of private Further, the area of the front boundary
(iii) 2.5 metres where above 7.5 setbacks are used to accommodate
open space or habitable areas of metres height presentation landscaping to the
adjoining premises; streetscape and the proposed visitor
(c) for the rear boundary - 6 metres
(c) provide adequate distance from parking spaces are setback 2m from
adjoining land uses; the Toolar Street frontage. The
AO11.2 proposal complies with the
(d) preserve existing The front 6 metres of the property is requirements of PO11.
vegetation that will help
landscaped open space, provided that
buffer development;
uncovered visitor parking, or swimming
(e) allow for space and landscaping to pools protruding no more than 1 metre
be provided between buildings above the ground level, can be as
including adequate area at ground close as 2 metres from the front
level for landscaping with trees, boundary.
shrubs, outdoor living and utilities;
(f) be consistent with the AO11.3
predominant character of the Relocatable homes are set back not less
surrounding area; and than:
(a) 6 metres from a road frontage;
(g) protect the natural character and
(b) 1.5 metres from any other site boundary;
avoid adverse impacts on
and
ecologically important areas such as
(c) 3 metres from an internal road
national parks, waterways and
wetlands.
AO11.4
Buildings and structures on premises with
frontage to the Noosa River system are set
back not less than 10 metres from mean
high water spring as shown in Figure
AP3-15A.
Setback to a watercourse in the Noosa AO12 Not applicable.
Waters estate, Noosaville For premises adjoining a watercourse
PO12 within the Noosa Waters estate no building
Land adjoining the revetment wall and for work, filling or excavation works occurs
a width of 4.5 metres serves flood within
detention and amenity functions, free of 4.5 metres from the centre line of the top of the
structures and impervious surfaces. concrete revetment wall.
Editor's note refer to figure 6.3.1.5
NOOSA PLAN 2020 Page 4 of 11
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalUsed in these records
Attachment C - 6.3.2 Medium Density Residential Zone Code.pdfRelated documentApplication case desk ↗
About this file
- File size
- 825 KB (small file)
- File type
No other editions are linked here.