Skip to the record
The gold standard in government transparency.

Council archive · source document

Part 6 of 37 Appendix 3 - Geotechnical Assessment MCU12/0208

of 95

Text shows just the words. Original shows the document exactly as it was published.

Check the original when the exact wording matters.

Very large file (49.3 MB): the whole original can take several minutes to open, especially on a phone. Text is quick to read.

                                                                                                 Noosa on Weyba




6.2    SCR Analysis

The   more    definitive full SCR   (chromium reducible) suite of laboratory tests were carried out on samples
recovered at 0.5m intervals from boreholes BH4, BH15, BH24, BH25, BH26, BH30, BH31, BH32. A total of
16 tests were used to determine levels of acidity.


Full laboratory test results are included in Annex B. Table 3 below provides a summary of determined net

acidity values for each tested sample. The net acidity has been based on the following equation from the
Acid Sulfate Soils Laboratory Methods Guidelines, Version 2.1, June 2004:

         Net Acidity =      Potential Sulfidic Acidity
                                                  *
                            plus Actual Acidity
                                                       *
                            plus Retained Acidity
                                                                                   *
                            minus Acid Neutralising Capacity/Fineness Factor
         *
             (not all components are included     -
                                                      depends on pHKC1 results).


Table 8 Calculated Net Acidity Results

      Test                   Depth                          Net Acidity,
   Location
                              (m)                             (eq%S)


                            0.00-0.50                          0.038
      BH4
                            1.00-1.50                          0.208

                            0.00-0.50                          0.017
      BH15
                            1.00-1.50                          0.027

                            0.00-0.50                          0.005
      BH24
                            1.00-1.50                          0.034

      BH25                  0.00-0.50                          0.024

                            1.00-1.50                          0.026

      BH26                  0.00-0.50                          0.038

                            1.00-1.50                          0.071

      BH30                  0.00-0.50                          0.055

                            1.00-1.50                          0.200

      BH31                  0.00-0.50                          0.047

                            100-1.50                           0.193

      BH32                  0.00-0.50                          0.055

                            1.00-1.50                          0.051



The relevant Tables A3.1 to A3.4 describing the particular analyses used in this calculation are reproduced
in Annex C.


The levels of potential sulfidic acidity (SCR or Spos) ranged between 0.005% and 0.208%, with the more

significant levels generally being encountered at depths of 1.0m to 1.5m at boreholes BH4, BH30, BH31.

The levels of actual acidity (s-TAA) ranged between 0.003% and 0.208%, with the more significant levels

generally being encountered at depths of 1.0m to 1.5m at locations BH4, BH30, BH31.

For projects that will disturb more than 1000 tonnes of soils the net acidity action criteria limit is 0.03% in
sulfur units, or 18mol H+/tonne for acidity units. Detailed design information on the proposed excavations on
site (eg for services and the basement, etc) are not available but it is expected earthworks for the proposed

development will disturb more than 1000 tonnes and therefore this action criteria has been adopted.

Prepared for Cardno (Old)                                                                               Page 20

Used in these records

About this file

File size
49.3 MB (very large file)
File type
PDF

No other editions are linked here.

Original file

Log in to download the original file

Part 6 of 37 Appendix 3 - Geotechnical Assessment MCU12_0208.pdf · 49.3 MB (very large file)

The download may take a few minutes. On mobile data, it is best to wait for Wi-Fi.

The supporting record

Open full page ↗

Source document

Analyse documents ↗Open full page ↗

My Comparisons

Choose two to four records of the same kind. Drag using a handle or use the “Compare” buttons.

Your selected records are saved in this browser for your account. Results use the filters on the page where you choose “Compare selected”.