Attach K- Code Compliance Tables

                                                                                   town planning
                                                                           code compliance tables
safety or use of any land upstream and               flows to that infrastructure; and
downstream; and                                      b) the infrastructure has the capacity to accept any
iii. adversely affecting the flow of water in any    additional loading;
overland flow path.
                                                     AND
                                                     S14.3 Car parking and maneuvering areas are
                                                     constructed at a level that permits the parking
                                                     area to drain from the site by gravity means,
                                                     without the need for mechanical pumping; or
                                                     S14.4 Basements for residential uses have flood
                                                     immunity above the Q100 where alternative
                                                     means to mechanical pumping are used to
                                                     achieve such immunity; or
                                                     S14.5 Basements for non-residential uses have
                                                     flood immunity above the Q100 that may be
                                                     achieved by means of mechanical pumping where
                                                     the mechanical feature is installed with adequate
                                                     holding tanks and an alternative back up power
                                                     source.
Sloping sites                                        S15.1 Buildings are of split level design that step    Complies – the building will have a suspended
O15 On sloping sites, buildings and structures are   down the slope or have a suspended floor               floor level that ties in with the Garnet St level
designed to maximise the use of natural slope and    construction; (See Figure 6.1 below)
minimise the need for cut and fill.                  AND
                                                     S15.2 Cut or fill is less than 2m in depth;
                                                     AND
                                                     S15.3 The distance between the ground and the
                                                     lowest part of the floor of the building does not
                                                     exceed 3m.




  saunders havill group                                                       page 15                                                                    Job 7588