2017-01-16 General Committee Meeting Notes

RECOMMENDATIONS ONLY – NOT THE FINAL DECISION OF COUNCIL
GENERAL COMMITTEE MEETING                                                  16 JANUARY 2017


        WASTE
              Waste Disposal
        94.   The developer must provide waste storage and disposal facilities in accordance
              with Planning Scheme Policy No. 9 “Waste Management Multi-Dwellings and
              Commercial and Industrial Premises”. The facilities must include an external
              impervious area correctly sized for all refuse and recycling containers and
              suitably screened from public places and neighbouring properties. A bin wash
              area is required with a cold-water tap, hose and drain outlet connected to sewer,
              via a bucket trap. The drain outlet must be designed to prevent storm water entry
              to the sewerage system. This can be achieved with a nib wall 50mm high and up
              to 700mm x 700mm wide (max 0.5m²), or alternatively the waste area can be
              roofed, or any other design approved by Council.
        95.   Refuse containers must be provided in accordance with the requirements of the
              Environmental Protection (Interim Waste) Regulation 1996 and (Waste
              Management) Regulation 2000, for the storage and collection of refuse.
        96.   Public bins must be provided throughout the car park to reduce littering. Bins
              provided must be for refuse and recycling and be decanted into the bulk bins by
              the site operators.
        OPERATIONAL WORKS FOR SIGNAGE – OPW16/0209
              Nature and Extent of Approved Development
        1.    This approval authorises the following signs as defined by the planning scheme
              and shown on the Approved Plans:
              a.   2 pylon signs
              b.   2 wall signs (building signs)
              c.   2 awning face signs (fuel canopy signs)
        2.    The approved signs must not be used for the advertisement of goods and/or
              services not sold or conducted on the site (i.e. third party advertising).
        3.    The approved signs must not exceed the dimensions and sign areas as shown
              on the Approved Plans. In this regard the pylon sign indicated as S1 on the
              approved plans must be reduced to a maximum sign face area of 4m².
        4.    The approved signs must be positioned wholly within the property boundaries of
              the subject site, and must not be located within or across any easements.
              Illumination
        5.    The approved signs must not be illuminated in any way except for 1 wall sign
              (building sign) and the pylon signs which may be illuminated.
        6.    The approved illuminated signs must not incorporate flashing lights nor involve
              illumination by any means other than:
              a.   an internal light source
              b.   a down light, if externally lit.
        7.    Illumination resulting from direct, reflected or other incidental light emanating
              from the approved signs must not exceed a luminance of 300 candelas per
              square metre.


                                                                                Page 28 of 52