Annex 8 - Safety in Design Report V1

1. SAFETY IN DESIGN


    1.1 THE LEGISLATION
The following legislation is relevant to this assessment.
    •       Work Health and Safety Act 2011
    •       Work Health and Safety Regulations 2011
ICM acknowledges it has a duty to comply with section 22 of the Work Health and Safety Act 2011 and ensure, so
far as is reasonably practicable, that the design does not result in an increase of risks to health and safety.
This report is to be provided to the client (section 295 of the Work Health and Safety Regulations). The client is
responsible for providing this report to the Principal Contractor (section 296).


    1.2 PRINICPLES, FRAMEWORK & PROCESS
The process of Safety in Design (SiD) adopted by ICM is consistent with ISO 31000:2018 (Figure 1), adapted as
required to suit a specific project and focussed only on risks associated with health and safety.




Figure 1: The Principles, Framework & Process (extract ISO 31000:2018)



                                                                                                                     1