Appendix A - Decision Notice & Approved Plans · 132007.2446.05

      •    A description of the design details of waste storage and recycling areas including size,
           location, elevation and floor plan, methods of bin washing and system to prevent storm
           water getting into sewer via the bin wash.
      •    A description of types and volume of waste storage containers to be used.
      •    The waste and recycling storage area shall include the provision of containers for all
           waste and recycling materials including putresable matter, non-recycling waste, paper/
           cardboard, glass, aluminum/steel cans, waste oil, styrofoam boxes, etc, and bin
           washing facilities connected to sewer.
      •    A detailed description of vehicular access to collect waste. Where collection is off
           street, access must allow vehicles to enter and leave the site in a forward direction.
54.   A Waste Management Plan (construction and demolition) shall be submitted prior to
      demolition, removal or relocation of any building other than a shed
      Waste Management Plans (construction and demolition) are required to be submitted in
      accordance with Planning Scheme Policy 11, Waste Management Plans see table below.
      Waste storage areas are to provide for adequate separation of all reusable, recyclable and
      waste materials. These shall be located so that they are convenient and safe to use. (Refer
      to Noosa Council Waste Management Code)
      The Plan shall contain the following information:
      •    The site area for the storage and separation of waste is to be shown on the plan
           drawings accompanying the application.
      •    A waste management table as indicated below is to be completed showing how waste
           material is to be segregated - recycled – reused or disposed.




                                                                                     Page 9 of 21