Council archive · source document
Development Application Part 2 of 2 - Application Plans, Bushfire Management Plan and Fire and Evac Plan - OPW13/0463
Plans and drawings: the text below has words only, no drawings.
Very large file (76.1 MB): may take a few minutes to open.
Table 1 (top part) validates Council’s "medium" bushfire hazard classification.
Fuel has now reaccumulated to very high levels since the last fire, at least 20 years ago. The highest fuel
accumulation occurs with increasingly closed heath, where Banksia aemula predominates; however these
areas are broken up by more open heath and fragmentation provided by pathways.
In order to provide an average available fuel load in the eastern vegetation zone, consideration was also
taken of Allocasuarina dominated areas (Location 2), and open patches of introduced grasses.
3.4 Fuel Accumulation Assessment -
Location 2
Figure 6. Fuel Accumulation Assessment -
Location 2.
Fuel hazard estimate Assessment according to Hines et al 2010
Date: 7th April 2013 location 2
layer Rating Description f Comments Equivalent fuel load
tfha
Surface and near surface High Surface litter bed height to 40mm .
Little near 12 -14
surface fuel.... suppressed by needle layer.
Sphagneticola trilobata (Singapore Daisy) edge
effect -
fire retardant weed.
Elevated Moderate -
High Suppressed recruiters 2
Bark Moderate Allocasuarina sp. 1
Overall rating High 15 -17 tfha
Table 2. Fuel Assessment location 2
Report compiled by Bushfire Risk Reducers for Fulton Trotter Architects, April 2013 Page 10
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalUsed in these records
Development Application Part 2 of 2 - Application Plans, Bushfire Management Plan and Fire and Evac Plan - OPW13/0463Related documentApplication case desk ↗
About this file
- File size
- 76.1 MB (very large file)
- File type
No other editions are linked here.
Original file
Log in to download the original file
The download may take a few minutes. On mobile data, it is best to wait for Wi-Fi.