Original source · versioned page text
Minor Change Existing Approval - MCU24 0143 01 (As Published)
Easements
27. Unless otherwise agreed in writing by the relevant service provider, any public or third party
infrastructure located on the subject site must be placed within an easement registered
against the title of the property.
28. All easements must be designed in accordance with the planning scheme and granted at no
cost to the Grantee. Where the Grantee is Council or a service authority, the easement
documentation must be in accordance with the Grantee’s standard easement terms. Draft
easement documentation must be submitted to Council for endorsement.
29. All works must be kept clear of any existing or proposed easements on the subject land,
unless agreed otherwise in writing by the Grantee.
Geotechnical Stability
30. All works must be carried out in accordance with the recommendations contained in a revised
version of Tectonic’s Slope Stability Assessment (24378-001-Rev1) which is amended to
reflect the revised cabin and siting location. Certification must be provided to the Building
Certifier that the development achieves a minimum factor of safety against landslip of 1.5 in
the long term.
(*) Refer to Advisory Note
Earthworks and Retaining Walls
31. All earthworks must be supervised by a Registered Professional Engineer of Queensland
(RPEQ).
32. All earthworks and associated foundations/footings, retaining structures/batters, both above
and below ground level and both temporary and permanent, must be contained entirely within
the subject site unless written permission from the respective landowner(s) is provided to
Council. All earthworks must be undertaken in accordance with the provisions of Australian
Standard AS3798: Guidelines on Earthworks for Commercial and Residential Developments.
33. Earthworks carried out on site must not affect the structural integrity of any of the adjoining
lands and/or buildings and/or structures and/or services.
Damage to Services and Assets
34. Any damage caused to existing services and assets as a result of the development works
must be repaired at no cost to the asset owner at the following times:
a. where the damage would cause a hazard to pedestrian or vehicle safety, immediately;
or
b. where otherwise, upon completion of the works associated with the development.
Any repair work which proposes to alter the alignment or level of existing services and assets
must first be referred to the relevant service authority for approval.
Additional Condition – 26 August 2026 - MCU24/0143.01
35. The development is to be staged with:
a) The northern cabin (Cabin 1) to be delivered as Stage 1; and
b) The southern cabin (Cabin 2) to be delivered as Stage 2.
5. REFERENCE DOCUMENTS
Plan No. Rev. Plan/Document Name Date
24378-001 1 “Slope Stability Assessment” 4 June 2025
Prepared by Tectonic
Page 5 of 8
Document Set ID: 25104812
Version: 5, Version Date: 02/09/2026
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalLog in to download the original (Minor Change Existing Approval - MCU24 0143 01 (As Published).pdf)
Searchable page text hides email addresses. Original files are unchanged and may show email addresses.